When you need Spring Lock Washer — GB/T 93 / DIN 127B (Series 080) in the M3 size, the controlling values come from GB/T 93 / DIN 127B. This page lists them in one place — pitch, head geometry, tool size and the matching hole.
M3 Dimensional Row (GB/T 93 / DIN 127B)
| For bolt size | Inner diameter d1 (mm) | Outer diameter d2 (mm) | Width b (mm) | Thickness t (mm) | Reference standard |
|---|---|---|---|---|---|
| M3 | 3.1 | 6.2 | 1.0 | 0.8 | GB/T 93 / DIN 127B |
Spanner & Drive for M3 Spring Lock Washer — GB/T 93 / DIN 127B (Series 080)
Drive geometry for M3 Spring Lock Washer — GB/T 93 / DIN 127B (Series 080) is given by the row above; match the tool to the listed values.
Common Applications for M3 Spring Lock Washer — GB/T 93 / DIN 127B (Series 080)
M3 Spring Lock Washer — GB/T 93 / DIN 127B (Series 080) are commonly specified for small electronics hardware and precision assemblies.
Installation Tips for M3 Spring Lock Washer — GB/T 93 / DIN 127B (Series 080)
- At M3 the joint is sensitive to over-torque — use a torque-limiting driver and check the head doesn't bury into a softer counterpart.
Mating Parts for M3
A M3 flat washer pairs with a M3 bolt/screw and matching M3 nut.
When to Step Up or Down from M3
When the joint preload approaches the proof load of M3 class 8.8, step up to M4 class 8.8 (or move to M3 class 10.9). When the joint is over-specified, M2 often saves weight and cost without losing the safety margin.