This page covers M30 Aluminum Flat Sealing Washers to DIN 7603 Type A. M30 is the nominal bolt size; the dimensional row below is reproduced from the product table, followed by the tolerance, material and selection notes that apply to this size.
M30 Dimensional Row (DIN 7603 Type A)
| For bolt size | Pitch (mm) | Inside diameter (mm) | Outside diameter (mm) | Thickness options (mm) | Material | Reference standard |
|---|---|---|---|---|---|---|
| M30 | 1.5 | 30.3 | 35.9 | 1.0 / 1.5 / 2.0 | aluminum | DIN 7603 Type A |
Mating Parts for M30
A M30 flat washer pairs with a M30 bolt/screw and matching M30 nut.
Custom manufacturing · Made to drawing
Need aluminum flat sealing washers in a size this table does not list?
This page covers M30 aluminum flat sealing washers. Bearing area is usually the reason for a special washer: a larger outside diameter to spread load into a softer material, or a thicker section to resist dishing. Made by stamping or punching.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.






