M30 is one of the standard coarse-thread sizes for hex thick nut under DIN 6330 / GB/T 56. The sections below reproduce the dimensional row, list the matching tools and hole sizes, and summarize where this size is normally specified.
M30 Dimensional Row (DIN 6330 / GB/T 56)
| Size | Pitch (mm) | Width across flats s (mm) | Width across corners e (mm) | Nut height m (mm) | Reference standard |
|---|---|---|---|---|---|
| M30 | 3.5 | 46.0 | 50.85 | 25.6 | ISO 4032 / GB/T 6170 |
Spanner & Drive for M30 Hex Thick Nut — DIN 6330 / GB/T 56 (Series 052)
M30 Hex Thick Nut — DIN 6330 / GB/T 56 (Series 052) have a width across flats of 46.0 mm — fit a 46.0 mm open-ended spanner or socket. Use a 6-point socket for tight clearances and to reduce rounding; for repeated assembly choose a torque wrench so the joint preload is repeatable.
Common Applications for M30 Hex Thick Nut — DIN 6330 / GB/T 56 (Series 052)
M30 Hex Thick Nut — DIN 6330 / GB/T 56 (Series 052) are commonly specified for structural joints, flange connections and heavy equipment foundations.
Installation Tips for M30 Hex Thick Nut — DIN 6330 / GB/T 56 (Series 052)
- Use a 6-point socket where access allows — 12-point sockets are more prone to rounding the corners on smaller sizes.
- On flanged or serrated variants, do NOT add a separate flat washer — the flange already spreads the load and the washer can defeat the locking serrations.
- At M30 the stretch in the bolt becomes the controlling factor — for critical joints, use angle-controlled or stretch-controlled tightening instead of pure torque.
Mating Parts for M30
Pair M30 with the matching M30 bolt or screw, plus a M30 flat washer where required to distribute load on softer materials.