Skip to content
info@engineeringhardware.com
Request a Quote

Washers · GB/T 858

M36 Plain Washer Dimensions & Specifications

M36 Plain Washer Dimensions & Specifications reference image

M36 is one of the standard coarse-thread sizes for plain washer under GB/T 858. The sections below reproduce the dimensional row, list the matching tools and hole sizes, and summarize where this size is normally specified.

M36 Dimensional Row (GB/T 858)

For bolt sizeInner diameter d1 (mm)Outer diameter d2 (mm)Thickness t (mm)Reference standard
M3637.066.05.0ISO 7089 / GB/T 97.1

Spanner & Drive for M36 Plain Washer — GB/T 858 (Series 071)

Drive geometry for M36 Plain Washer — GB/T 858 (Series 071) is given by the row above; match the tool to the listed values.

Common Applications for M36 Plain Washer — GB/T 858 (Series 071)

M36 Plain Washer — GB/T 858 (Series 071) are commonly specified for high-load load-spreading on structural joints.

Installation Tips for M36 Plain Washer — GB/T 858 (Series 071)

  • At M36 the stretch in the bolt becomes the controlling factor — for critical joints, use angle-controlled or stretch-controlled tightening instead of pure torque.

Mating Parts for M36

A M36 flat washer pairs with a M36 bolt/screw and matching M36 nut.

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (GB/T 858)

For bolt sizeInner diameter d1 (mm)Outer diameter d2 (mm)Thickness t (mm)Reference standard
M33.27.00.5ISO 7089 / GB/T 97.1
M44.39.00.8ISO 7089 / GB/T 97.1
M55.310.01.0ISO 7089 / GB/T 97.1
M66.412.01.6ISO 7089 / GB/T 97.1
M88.416.01.6ISO 7089 / GB/T 97.1
M1010.520.02.0ISO 7089 / GB/T 97.1
M1213.024.02.5ISO 7089 / GB/T 97.1
M1415.028.02.5ISO 7089 / GB/T 97.1
M1617.030.03.0ISO 7089 / GB/T 97.1
M1819.034.03.0ISO 7089 / GB/T 97.1
M2021.037.03.0ISO 7089 / GB/T 97.1
M2425.044.04.0ISO 7089 / GB/T 97.1
M3031.056.04.0ISO 7089 / GB/T 97.1
M3637.066.05.0ISO 7089 / GB/T 97.1

Frequently Asked Questions

Which washer dimensions matter most for M36?

For a flat washer, the outside diameter (the bearing surface) and the thickness control how the load is spread under the head and how much elastic preload is preserved. The inside diameter must clear the bolt body but not be so large that the head bears mostly on the washer's outer rim.

What is the coarse-thread pitch of M36 for Plain Washer — GB/T 858 (Series 071)?

For M36 the standard coarse pitch is 4 mm — this is the value used for Plain Washer — GB/T 858 (Series 071).

What clearance and tapping drill suit M36?

Use a 39 mm clearance hole (ISO 273 medium) for through-fixing, or a 32 mm tapping drill for a coarse M36 thread.

Should M36 Plain Washer — GB/T 858 (Series 071) be tightened by torque or by angle?

For critical structural joints at M36, angle-controlled or stretch-controlled tightening is more repeatable than pure torque — the friction scatter at large diameters can dominate the torque signal.

How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.