This page covers M4 Hex Slotted Nut to GB/T 6181 / ISO 4035: the full dimensional row, hole and tool sizes, proof-load data and typical applications. All values are taken from the governing standards (GB/T 6181 / ISO 4035 together with ISO 273, ISO 724 and ISO 898-1 where applicable).
M4 Dimensional Row (GB/T 6181 / ISO 4035)
| Size | Pitch (mm) | Width across flats s (mm) | Width across corners e (mm) | Nut height m (mm) | Reference standard |
|---|---|---|---|---|---|
| M4 | 0.7 | 7.0 | 7.66 | 2.2 | ISO 4035 / GB/T 6172 |
Spanner & Drive for M4 Hex Slotted Nut — GB/T 6181 / ISO 4035 (Series 054)
M4 Hex Slotted Nut — GB/T 6181 / ISO 4035 (Series 054) have a width across flats of 7.0 mm — fit a 7.0 mm open-ended spanner or socket. Use a 6-point socket for tight clearances and to reduce rounding; for repeated assembly choose a torque wrench so the joint preload is repeatable.
Common Applications for M4 Hex Slotted Nut — GB/T 6181 / ISO 4035 (Series 054)
M4 Hex Slotted Nut — GB/T 6181 / ISO 4035 (Series 054) are commonly specified for paired with the same-size screws on PCB hardware, light enclosures and small-scale assemblies.
Installation Tips for M4 Hex Slotted Nut — GB/T 6181 / ISO 4035 (Series 054)
- Use a 6-point socket where access allows — 12-point sockets are more prone to rounding the corners on smaller sizes.
- On flanged or serrated variants, do NOT add a separate flat washer — the flange already spreads the load and the washer can defeat the locking serrations.
- At M4 the joint is sensitive to over-torque — use a torque-limiting driver and check the head doesn't bury into a softer counterpart.
Mating Parts for M4
Pair M4 with the matching M4 bolt or screw, plus a M4 flat washer where required to distribute load on softer materials.