When you need Hex Nut — GB/T 41 / ISO 4034 (Series 060) in the M4 size, the controlling values come from GB/T 41 / ISO 4034. This page lists them in one place — pitch, head geometry, tool size and the matching hole.
M4 Dimensional Row (GB/T 41 / ISO 4034)
| Size | Pitch (mm) | Width across flats s (mm) | Width across corners e (mm) | Nut height m (mm) | Reference standard |
|---|---|---|---|---|---|
| M4 | 0.7 | 7.0 | 7.66 | 3.2 | ISO 4032 / GB/T 6170 |
Spanner & Drive for M4 Hex Nut — GB/T 41 / ISO 4034 (Series 060)
M4 Hex Nut — GB/T 41 / ISO 4034 (Series 060) have a width across flats of 7.0 mm — fit a 7.0 mm open-ended spanner or socket. Use a 6-point socket for tight clearances and to reduce rounding; for repeated assembly choose a torque wrench so the joint preload is repeatable.
Common Applications for M4 Hex Nut — GB/T 41 / ISO 4034 (Series 060)
M4 Hex Nut — GB/T 41 / ISO 4034 (Series 060) are commonly specified for paired with the same-size screws on PCB hardware, light enclosures and small-scale assemblies.
Installation Tips for M4 Hex Nut — GB/T 41 / ISO 4034 (Series 060)
- Use a 6-point socket where access allows — 12-point sockets are more prone to rounding the corners on smaller sizes.
- On flanged or serrated variants, do NOT add a separate flat washer — the flange already spreads the load and the washer can defeat the locking serrations.
- At M4 the joint is sensitive to over-torque — use a torque-limiting driver and check the head doesn't bury into a softer counterpart.
Mating Parts for M4
Pair M4 with the matching M4 bolt or screw, plus a M4 flat washer where required to distribute load on softer materials.
When to Step Up or Down from M4
When the joint preload approaches the proof load of M4 class 8.8, step up to M5 class 8.8 (or move to M4 class 10.9). When the joint is over-specified, M3 often saves weight and cost without losing the safety margin.