Selecting Nylon Insert Hex Lock Nut — GB/T 889 / ISO 7040 (Series 078), M4, in GB/T 889 / ISO 7040: the dimensional row from the standard plus the tools and hole sizes follow. Use them with the technical drawing below — the drawing redraws to the exact size you pick.
M4 Dimensional Row (GB/T 889 / ISO 7040)
| Size | Pitch (mm) | Width across flats s (mm) | Width across corners e (mm) | Total height m (mm) | Reference standard |
|---|---|---|---|---|---|
| M4 | 0.7 | 7.0 | 7.66 | 5.0 | ISO 7040 / DIN 985 |
Spanner & Drive for M4 Nylon Insert Hex Lock Nut — GB/T 889 / ISO 7040 (Series 078)
Drive geometry for M4 Nylon Insert Hex Lock Nut — GB/T 889 / ISO 7040 (Series 078) is given by the row above; match the tool to the listed values.
Common Applications for M4 Nylon Insert Hex Lock Nut — GB/T 889 / ISO 7040 (Series 078)
M4 Nylon Insert Hex Lock Nut — GB/T 889 / ISO 7040 (Series 078) are commonly specified for paired with the same-size screws on PCB hardware, light enclosures and small-scale assemblies.
Installation Tips for M4 Nylon Insert Hex Lock Nut — GB/T 889 / ISO 7040 (Series 078)
- At M4 the joint is sensitive to over-torque — use a torque-limiting driver and check the head doesn't bury into a softer counterpart.
Mating Parts for M4
Pair M4 with the matching M4 bolt or screw, plus a M4 flat washer where required to distribute load on softer materials.
When to Step Up or Down from M4
When the joint preload approaches the proof load of M4 class 8.8, step up to M5 class 8.8 (or move to M4 class 10.9). When the joint is over-specified, M3 often saves weight and cost without losing the safety margin.