On the bench specifying M6 Hex Thick Nut — DIN 6330 / GB/T 56 (Series 052)? This page gives the controlling dimensions for the M6 size of Hex Thick Nut — DIN 6330 / GB/T 56 (Series 052) (to DIN 6330 / GB/T 56).
M6 Dimensional Row (DIN 6330 / GB/T 56)
| Size | Pitch (mm) | Width across flats s (mm) | Width across corners e (mm) | Nut height m (mm) | Reference standard |
|---|---|---|---|---|---|
| M6 | 1.0 | 10.0 | 11.05 | 5.2 | ISO 4032 / GB/T 6170 |
Spanner & Drive for M6 Hex Thick Nut — DIN 6330 / GB/T 56 (Series 052)
M6 Hex Thick Nut — DIN 6330 / GB/T 56 (Series 052) have a width across flats of 10.0 mm — fit a 10.0 mm open-ended spanner or socket. Use a 6-point socket for tight clearances and to reduce rounding; for repeated assembly choose a torque wrench so the joint preload is repeatable.
Common Applications for M6 Hex Thick Nut — DIN 6330 / GB/T 56 (Series 052)
M6 Hex Thick Nut — DIN 6330 / GB/T 56 (Series 052) are commonly specified for general-purpose joints in machinery, fixturing and equipment frames.
Installation Tips for M6 Hex Thick Nut — DIN 6330 / GB/T 56 (Series 052)
- Use a 6-point socket where access allows — 12-point sockets are more prone to rounding the corners on smaller sizes.
- On flanged or serrated variants, do NOT add a separate flat washer — the flange already spreads the load and the washer can defeat the locking serrations.
Mating Parts for M6
Pair M6 with the matching M6 bolt or screw, plus a M6 flat washer where required to distribute load on softer materials.
When to Step Up or Down from M6
When the joint preload approaches the proof load of M6 class 8.8, step up to M8 class 8.8 (or move to M6 class 10.9). When the joint is over-specified, M5 often saves weight and cost without losing the safety margin.