The M6 size of Knurled Nuts, High Type is dimensioned by DIN 466. The table below gives the dimensional row from the standard, followed by the installation notes for this type.
Values are taken from the governing standard rather than from a general machine-thread table, because this type is not selected on one.
M6 Dimensional Row (DIN 466)
| Thread size | Pitch (mm) | Body diameter d2 (mm) | Total height m (mm) | Collar diameter (mm) | Collar height (mm) | Knurl type | Reference standard |
|---|---|---|---|---|---|---|---|
| M6 | 1.0 | 21 | 14 | 28 | 3.5 | Straight | DIN 466 |
Mating Parts for M6
Pair M6 with the matching M6 bolt or screw, plus a M6 flat washer where required to distribute load on softer materials.
Custom manufacturing · Made to drawing
Need knurled nuts, high type in a size this table does not list?
This page covers M6 knurled nuts, high type. Dimensions, material, finish and form are specified from the drawing — a nut outside the standard range is a variation on existing tooling rather than a new design. Made by cold heading or tapping.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.
