The M6 size of Wing Screws (DIN 316 Form) is dimensioned by DIN 316. The table below gives the dimensional row from the standard, followed by the installation notes for this type.
Values are taken from the governing standard rather than from a general machine-thread table, because this type is not selected on one.
M6 Dimensional Row (DIN 316)
| Thread size | Pitch (mm) | Wing span A (mm) | Wing height (mm) | Boss diameter (mm) | Common length range (mm) | Material | Reference standard |
|---|---|---|---|---|---|---|---|
| M6 | 1.0 | 32 | 14 | 13 | 10~50 | Steel zinc / A2 | DIN 316 |
Hole Sizes for M6
| Coarse-thread pitch (ISO 724) | 1 mm |
|---|---|
| Through-hole / clearance (ISO 273 medium) | 6.6 mm |
| Tapping drill, coarse thread | 5 mm |
Mating Parts for M6
For M6, pair with a M6 hex nut (ISO 4032 / DIN 934) and, where used, a M6 flat washer (ISO 7089 / DIN 125A) under the head and under the nut.
Custom manufacturing · Made to drawing
Need wing screws (din 316 form) in a size this table does not list?
This page covers M6 wing screws (din 316 form). A non-standard screw is quoted from the drawing; where one already exists in the catalog, the special is usually a variation on its tooling. Made by cold heading or warm forging.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.
