Grade 5 UNF Fine-Thread Hex Nuts manufactured to ASME B18.2.2 are dimensioned by the size table reproduced on this page. The standard fixes geometry and tolerances only; material and property class are assigned by separate documents, and surface finish by separate finish standards.
ASME B18.2.2 — Scope
ASME B18.2.2 is "Nuts for general applications: machine screw nuts, hex, square, hex flange, and coupling nuts (inch series)". An inch-series document.
Material, property class, surface finish and packaging are governed by separate documents — ISO 898-1 and ISO 898-2 for mechanical property classes, ISO 4042 for electroplated finishes.
Tolerance & Product Grades
ASME B18.2.2 does not divide grade 5 unf fine-thread hex nuts into product grades. Tolerances are given as limits on the individual dimensions in the table.
Where a general-tolerance class is cited on the drawing instead, it applies to the dimensions not otherwise toleranced.
Dimensions Specified by ASME B18.2.2
| Thread series | Material | Mating bolt grades | Finish options | Governing standards |
|---|---|---|---|---|
| UNF fine | medium carbon steel | Grade 5 or Grade 8 hex bolts | zinc plating or black oxide | ASME B18.2.2 / ASTM A563 |
| UNF fine | medium carbon steel | Grade 5 hex bolts | zinc plating | ASME B1.1 thread form |
Equivalent Standards
Where direct equivalents exist (ISO ↔ DIN, ISO ↔ ASME), they are listed on the parent Grade 5 UNF Fine-Thread Hex Nuts page.
Always confirm against the dimensions on this page, since some "equivalent" standards differ in tolerances and head geometry.
When to Specify ASME B18.2.2
ASME B18.2.2 is the inch-based reference; for metric programs choose the ISO equivalent instead.
Custom manufacturing · Made to drawing
Need a nut to this standard in a non-standard size?
Parts built to ASME B18 2 2 are already in the catalog, so a special is usually a variation on existing tooling rather than a new design — which is what keeps the cost down. Made by cold heading or tapping.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.
