Specification summary of DIN 1144 as applied to large round head nails for wood wool panels: the dimensions the standard fixes, the full size range supplied, and the related designations commonly cross-referenced.
DIN 1144 — Scope
The table below lists the dimensions catalogued for large round head nails for wood wool panels under DIN 1144. The scope of DIN 1144 itself is not summarised here — where a figure matters, confirm it against the published document.
Tolerance & Product Grades
Product grade is a concept from dimensional fastener standards and does not apply to DIN 1144. Tolerances for this part are the limits shown against each dimension in the table.
Dimensions Specified by DIN 1144
| Size | d (mm) | l (mm) | Reference standard |
|---|---|---|---|
| 31x40 | 3.1 | 40 | DIN 1144 |
| 31x50 | 3.1 | 50 | DIN 1144 |
| 31x60 | 3.1 | 60 | DIN 1144 |
| 34x70 | 3.4 | 70 | DIN 1144 |
| 34x80 | 3.4 | 80 | DIN 1144 |
| 34x90 | 3.4 | 90 | DIN 1144 |
Equivalent Standards
Where direct equivalents exist (ISO ↔ DIN, ISO ↔ ASME), they are listed on the parent Large Round Head Nails for Wood Wool Panels page.
Always confirm against the dimensions on this page, since some "equivalent" standards differ in tolerances and head geometry.
Companion Standards
A complete specification for large round head nails for wood wool panels normally cites several documents: one for the geometry, one for the material or mechanical properties, and one for the finish. DIN 1144 is one of them, not all of them.
Custom manufacturing · Made to drawing
Need a nail to this standard in a non-standard size?
Parts built to DIN 1144 are already in the catalog, so a special is usually a variation on existing tooling rather than a new design — which is what keeps the cost down.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.
