For compression springs, DIN 2098 defines the dimensions, tolerances and product grades. The sections below describe the scope of the document, the properties it deliberately leaves to companion standards, and the equivalent designations across standards bodies.
DIN 2098 — Scope
DIN 2098 specifies the dimensions and tolerances of compression springs. Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).
Tolerance & Product Grades
DIN 2098, alongside the related DIN 2098 entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.
Dimensions Specified by DIN 2098
| Wire dia d (mm) | Inner diameter Di (mm) | Outer diameter De (mm) | Free length Lo (mm) | Active coils n | Rated force Fn (N) | Rate k (N/mm) | Material | Reference standard | Notes |
|---|---|---|---|---|---|---|---|---|---|
| 0.5 | 3.0 | 4.0 | 15 | 8 | 8 | 1.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 0.5 | 4.0 | 5.0 | 20 | 10 | 6 | 0.7 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 0.6 | 4.0 | 5.2 | 20 | 9 | 12 | 1.5 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 0.7 | 5.0 | 6.4 | 25 | 10 | 15 | 1.5 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 0.8 | 5.0 | 6.6 | 25 | 10 | 22 | 2.5 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 1.0 | 6.0 | 8.0 | 30 | 10 | 35 | 3.5 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 1.0 | 8.0 | 10.0 | 40 | 12 | 25 | 2.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 1.2 | 8.0 | 10.4 | 40 | 10 | 55 | 6.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 1.5 | 10.0 | 13.0 | 50 | 10 | 80 | 8.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 1.6 | 12.0 | 15.2 | 60 | 10 | 90 | 8.5 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 2.0 | 12.0 | 16.0 | 60 | 10 | 165 | 18.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 2.0 | 16.0 | 20.0 | 80 | 12 | 110 | 10.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 2.5 | 16.0 | 21.0 | 80 | 10 | 260 | 28.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 2.5 | 20.0 | 25.0 | 100 | 12 | 200 | 18.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 3.0 | 20.0 | 26.0 | 100 | 10 | 450 | 45.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 3.0 | 25.0 | 31.0 | 120 | 12 | 320 | 28.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 4.0 | 25.0 | 33.0 | 120 | 10 | 1000 | 90.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 4.0 | 30.0 | 38.0 | 150 | 12 | 750 | 65.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 5.0 | 30.0 | 40.0 | 150 | 10 | 1900 | 170.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 5.0 | 40.0 | 50.0 | 200 | 12 | 1200 | 100.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 6.0 | 40.0 | 52.0 | 200 | 10 | 3300 | 280.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 6.0 | 50.0 | 62.0 | 250 | 12 | 2100 | 185.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 8.0 | 50.0 | 66.0 | 250 | 10 | 7500 | 650.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 8.0 | 65.0 | 81.0 | 300 | 12 | 4800 | 430.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 10.0 | 65.0 | 85.0 | 300 | 10 | 14500 | 1200.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 10.0 | 80.0 | 100.0 | 350 | 12 | 9500 | 800.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
Companion Standards
DIN 2098 controls only the geometry of compression springs. The mechanical strength is set by ISO 898-1 (bolts and screws) or ISO 898-2 (nuts); the surface finish is governed by separate finish standards (e.g. ISO 4042 for electroplating). For corrosion testing, the relevant document is ISO 9227 (neutral salt spray).
When to Specify DIN 2098
DIN 2098 is still widely used in European mechanical engineering and as a cross-reference on legacy drawings; its ISO equivalent is preferred for new designs.