The table below lists the dimensions catalogued for nylon insert flange nuts (din 6926) under DIN 6926. The scope of DIN 6926 itself is not summarised here — where a figure matters, confirm it against the published document.
DIN 6926 — Scope
The table below lists the dimensions catalogued for nylon insert flange nuts (din 6926) under DIN 6926. The scope of DIN 6926 itself is not summarised here — where a figure matters, confirm it against the published document.
Tolerance & Product Grades
Product grade is a concept from dimensional fastener standards and does not apply to DIN 6926. Tolerances for this part are the limits shown against each dimension in the table.
Dimensions Specified by DIN 6926
| Thread size | Pitch (mm) | Width across flats s (mm) | Flange diameter dc (mm) | Total height m (mm) | Flange face | Max service temperature (°C) | Reference standard |
|---|---|---|---|---|---|---|---|
| M5 | 0.8 | 8.0 | 11.8 | 7.5 | Smooth | 120 | DIN 6926 |
| M6 | 1.0 | 10.0 | 14.2 | 9.0 | Smooth | 120 | DIN 6926 |
| M8 | 1.25 | 13.0 | 17.9 | 11.0 | Smooth | 120 | DIN 6926 |
| M10 | 1.5 | 15.0 | 21.8 | 13.0 | Smooth | 120 | DIN 6926 |
| M12 | 1.75 | 18.0 | 26.0 | 16.0 | Smooth | 120 | DIN 6926 |
| M16 | 2.0 | 24.0 | 34.5 | 20.0 | Smooth | 120 | DIN 6926 |
Equivalent Standards
Where direct equivalents exist (ISO ↔ DIN, ISO ↔ ASME), they are listed on the parent Nylon Insert Flange Nuts (DIN 6926) page.
Always confirm against the dimensions on this page, since some "equivalent" standards differ in tolerances and head geometry.
Companion Standards
A complete specification for nylon insert flange nuts (din 6926) normally cites several documents: one for the geometry, one for the material or mechanical properties, and one for the finish. DIN 6926 is one of them, not all of them.
Custom manufacturing · Made to drawing
Need a nut to this standard in a non-standard size?
Parts built to DIN 6926 are already in the catalog, so a special is usually a variation on existing tooling rather than a new design — which is what keeps the cost down. Made by cold heading or tapping.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.
