DIN covers the dimensional requirements for housed (pillow block) bearing. Reproduced below: the complete size table, the tolerance grades, and the companion and equivalent standards referenced when ordering to this document.
DIN — Scope
DIN specifies the dimensions and tolerances of housed (pillow block) bearing — iso / din (series 122). Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).
Tolerance & Product Grades
DIN, alongside the related ISO / DIN entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.
Dimensions Specified by DIN
| Shaft size (mm) | Housing length (mm) | Total height (mm) | Bolt center distance (mm) | Bolt size | Reference standard |
|---|---|---|---|---|---|
| 15 | 90 | 38 | 65 | M10 | ISO 113 / GB/T 7813 |
| 20 | 108 | 42 | 75 | M10 | ISO 113 / GB/T 7813 |
| 25 | 127 | 47 | 90 | M12 | ISO 113 / GB/T 7813 |
| 30 | 140 | 55 | 100 | M12 | ISO 113 / GB/T 7813 |
| 35 | 162 | 62 | 115 | M14 | ISO 113 / GB/T 7813 |
| 40 | 175 | 68 | 130 | M14 | ISO 113 / GB/T 7813 |
| 50 | 205 | 75 | 150 | M16 | ISO 113 / GB/T 7813 |
| 60 | 250 | 85 | 180 | M16 | ISO 113 / GB/T 7813 |
| 80 | 300 | 105 | 220 | M20 | ISO 113 / GB/T 7813 |
Equivalent Standards
Where direct equivalents exist (ISO ↔ DIN, ISO ↔ ASME), they are listed on the parent Housed (Pillow Block) Bearing — ISO / DIN (Series 122) page. Always confirm against the dimensions on this page, since some "equivalent" standards differ in tolerances and head geometry.
When to Specify DIN
DIN is still widely used in European mechanical engineering and as a cross-reference on legacy drawings; its ISO equivalent is preferred for new designs.