For Cylindrical Roller Bearing — ISO / DIN (Series 139), DIN defines dimensions, tolerances and product grades. The sections below describe its scope, what it does NOT cover, and the equivalents across DIN, ISO and ASME.
DIN — Scope
DIN specifies the dimensions and tolerances of cylindrical roller bearing — iso / din (series 139). Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).
Tolerance & Product Grades
DIN, alongside the related ISO / DIN entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.
Dimensions Specified by DIN
| Bore d (mm) | Outer diameter D (mm) | Width B (mm) | Dynamic load C (kN) | Limit speed (rpm) | Reference standard |
|---|---|---|---|---|---|
| 20 | 47 | 14 | 28.4 | 11000 | ISO 246 / GB/T 283 |
| 25 | 52 | 15 | 33.5 | 10000 | ISO 246 / GB/T 283 |
| 30 | 62 | 16 | 49.5 | 8500 | ISO 246 / GB/T 283 |
| 35 | 72 | 17 | 67.0 | 7500 | ISO 246 / GB/T 283 |
| 40 | 80 | 18 | 78.0 | 6700 | ISO 246 / GB/T 283 |
| 50 | 90 | 20 | 93.0 | 6000 | ISO 246 / GB/T 283 |
| 60 | 110 | 22 | 138 | 5000 | ISO 246 / GB/T 283 |
| 75 | 130 | 25 | 180 | 4300 | ISO 246 / GB/T 283 |
| 90 | 160 | 30 | 238 | 3600 | ISO 246 / GB/T 283 |
Equivalent Standards
Where direct equivalents exist (ISO ↔ DIN, ISO ↔ ASME), they are listed on the parent Cylindrical Roller Bearing — ISO / DIN (Series 139) page. Always confirm against the dimensions on this page, since some "equivalent" standards differ in tolerances and head geometry.
When to Specify DIN
DIN is still widely used in European mechanical engineering and as a cross-reference on legacy drawings; its ISO equivalent is preferred for new designs.