GB is the governing dimensional standard for tab lock washer for round nut. This page sets out the scope of the standard, reproduces the full size table it specifies, and lists the DIN/ISO/ASME cross-references commonly cited in datasheets and drawings.
GB — Scope
GB specifies the dimensions and tolerances of tab lock washer for round nut — gb/t 858 (series 072). Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).
Tolerance & Product Grades
GB, alongside the related GB/T 858 entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.
Dimensions Specified by GB
| For shaft / nut size | Inner diameter d1 (mm) | Outer diameter d2 (mm) | Thickness t (mm) | Tab length (mm) | Reference standard |
|---|---|---|---|---|---|
| M10 | 10.5 | 21 | 1.0 | 8 | GB/T 858 |
| M12 | 12.5 | 25 | 1.0 | 9 | GB/T 858 |
| M16 | 16.5 | 30 | 1.0 | 10 | GB/T 858 |
| M20 | 20.5 | 38 | 1.5 | 12 | GB/T 858 |
| M24 | 24.5 | 45 | 1.5 | 14 | GB/T 858 |
| M30 | 30.5 | 55 | 1.5 | 16 | GB/T 858 |
| M36 | 36.5 | 65 | 2.0 | 18 | GB/T 858 |
| M48 | 48.5 | 85 | 2.0 | 20 | GB/T 858 |
| M60 | 60.5 | 105 | 2.5 | 24 | GB/T 858 |
Equivalent Standards
Where direct equivalents exist (ISO ↔ DIN, ISO ↔ ASME), they are listed on the parent Tab Lock Washer for Round Nut — GB/T 858 (Series 072) page. Always confirm against the dimensions on this page, since some "equivalent" standards differ in tolerances and head geometry.
When to Specify GB
Choose GB for international engineering work and OEM supply where ISO standards are the contractual reference. It is the default modern specification for tab lock washer for round nut — gb/t 858 (series 072).