GB is the international standard for square nut — gb/t 39 / iso 4034 (series 075). This page sets out what the standard governs, the size range it specifies, and the related standards you will see referenced in datasheets.
GB — Scope
GB specifies the dimensions and tolerances of square nut — gb/t 39 / iso 4034 (series 075). Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).
Tolerance & Product Grades
GB, alongside the related GB/T 39 / ISO 4034 entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.
Dimensions Specified by GB
| Size | Pitch (mm) | Width across flats s (mm) | Nut height m (mm) | Reference standard |
|---|---|---|---|---|
| M3 | 0.5 | 5.5 | 1.8 | GB/T 39 / DIN 562 |
| M4 | 0.7 | 7.0 | 2.2 | GB/T 39 / DIN 562 |
| M5 | 0.8 | 8.0 | 2.7 | GB/T 39 / DIN 562 |
| M6 | 1.0 | 10.0 | 3.6 | GB/T 39 / DIN 562 |
| M8 | 1.25 | 13.0 | 4.8 | GB/T 39 / DIN 562 |
| M10 | 1.5 | 17.0 | 6.0 | GB/T 39 / DIN 562 |
| M12 | 1.75 | 19.0 | 7.0 | GB/T 39 / DIN 562 |
| M16 | 2.0 | 24.0 | 9.0 | GB/T 39 / DIN 562 |
| M20 | 2.5 | 30.0 | 12.0 | GB/T 39 / DIN 562 |
| M24 | 3.0 | 36.0 | 14.0 | GB/T 39 / DIN 562 |
Companion Standards
GB controls only the geometry of square nut — gb/t 39 / iso 4034 (series 075). The mechanical strength is set by ISO 898-1 (bolts and screws) or ISO 898-2 (nuts); the surface finish is governed by separate finish standards (e.g. ISO 4042 for electroplating). For corrosion testing, the relevant document is ISO 9227 (neutral salt spray).
When to Specify GB
Choose GB for international engineering work and OEM supply where ISO standards are the contractual reference. It is the default modern specification for square nut — gb/t 39 / iso 4034 (series 075).