GB/T 825 is the standard cited for lifting eye bolt. This page sets out what the standard controls for this part, reproduces the dimensional table supplied against it, and notes the related designations referenced on drawings.
GB/T 825 — Scope
GB/T 825 is "Lifting eye bolts". GB/T 825 is the Chinese national adoption of the same document. The working load limit depends on the angle of pull, which the standard tabulates.
Material, property class, surface finish and packaging are governed by separate documents — ISO 898-1 and ISO 898-2 for mechanical property classes, ISO 4042 for electroplated finishes.
Tolerance & Product Grades
GB/T 825 does not divide lifting eye bolt — din 580 / gb/t 825 (series 020) into product grades. Tolerances are given as limits on the individual dimensions in the table.
Where a general-tolerance class is cited on the drawing instead, it applies to the dimensions not otherwise toleranced.
Dimensions Specified by GB/T 825
| Thread size | Pitch (mm) | Ring outer dia D (mm) | Ring wire dia (mm) | Total length L (mm) | SWL (kg, axial) | Reference standard |
|---|---|---|---|---|---|---|
| M8 | 1.25 | 20 | 8 | 36 | 140 | DIN 580 / GB/T 825 |
| M10 | 1.5 | 25 | 10 | 45 | 230 | DIN 580 / GB/T 825 |
| M12 | 1.75 | 30 | 12 | 54 | 340 | DIN 580 / GB/T 825 |
| M16 | 2.0 | 35 | 14 | 63 | 700 | DIN 580 / GB/T 825 |
| M20 | 2.5 | 40 | 16 | 72 | 1200 | DIN 580 / GB/T 825 |
| M24 | 3.0 | 50 | 20 | 90 | 1800 | DIN 580 / GB/T 825 |
| M30 | 3.5 | 60 | 25 | 108 | 3200 | DIN 580 / GB/T 825 |
| M36 | 4.0 | 72 | 30 | 126 | 5000 | DIN 580 / GB/T 825 |
Companion Standards
GB/T 825 controls only the geometry of lifting eye bolt — din 580 / gb/t 825 (series 020). The mechanical strength is set by ISO 898-1 (bolts, screws and studs) or ISO 898-2 (nuts); the surface finish is governed by separate finish standards such as ISO 4042 for electroplating. For corrosion testing, the relevant document is ISO 9227 (neutral salt spray).
When to Specify GB/T 825
Choose GB/T 825 for international engineering work and OEM supply where ISO standards are the contractual reference. It is the default modern specification for lifting eye bolt — din 580 / gb/t 825 (series 020).
Custom manufacturing · Made to drawing
Need a bolt to this standard in a non-standard size?
Parts built to GB T 825 are already in the catalog, so a special is usually a variation on existing tooling rather than a new design — which is what keeps the cost down. Made by cold heading or hot forging.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.
