GB/T 825 is the standard cited for lifting eye bolt. This page sets out what the standard controls for this part, reproduces the dimensional table supplied against it, and notes the related designations referenced on drawings.
GB/T 825 — Scope
GB/T 825 specifies the dimensional requirements for lifting eye bolt — gb/t 825 / din 580 (series 036). Material, surface condition and any performance rating are set by separate documents specific to this part family — ISO 898-1 and ISO 898-2, which govern bolt and nut property classes, do not apply here.
Tolerance & Product Grades
Tolerances for lifting eye bolt — gb/t 825 / din 580 (series 036) are given as limits on the individual dimensions in the table rather than as a fastener product grade. Where a general-tolerance class is cited on the drawing instead, it applies to the dimensions not otherwise toleranced.
Dimensions Specified by GB/T 825
| Size | Pitch (mm) | Length L (mm) | Head diameter dk (mm) | Head height k (mm) | Hex socket s (mm) | Reference standard |
|---|---|---|---|---|---|---|
| M3 | 0.5 | 20 | 5.5 | 3 | 2.5 | ISO 4762 / GB/T 70.1 |
| M4 | 0.7 | 25 | 7.0 | 4 | 3.0 | ISO 4762 / GB/T 70.1 |
| M5 | 0.8 | 30 | 8.5 | 5 | 4.0 | ISO 4762 / GB/T 70.1 |
| M6 | 1.0 | 40 | 10.0 | 6 | 5.0 | ISO 4762 / GB/T 70.1 |
| M8 | 1.25 | 50 | 13.0 | 8 | 6.0 | ISO 4762 / GB/T 70.1 |
| M10 | 1.5 | 60 | 16.0 | 10 | 8.0 | ISO 4762 / GB/T 70.1 |
| M12 | 1.75 | 80 | 18.0 | 12 | 10.0 | ISO 4762 / GB/T 70.1 |
| M14 | 2.0 | 80 | 21.0 | 14 | 12.0 | ISO 4762 / GB/T 70.1 |
| M16 | 2.0 | 100 | 24.0 | 16 | 14.0 | ISO 4762 / GB/T 70.1 |
| M18 | 2.5 | 100 | 27.0 | 18 | 14.0 | ISO 4762 / GB/T 70.1 |
| M20 | 2.5 | 120 | 30.0 | 20 | 17.0 | ISO 4762 / GB/T 70.1 |
| M24 | 3.0 | 150 | 36.0 | 24 | 19.0 | ISO 4762 / GB/T 70.1 |
| M30 | 3.5 | 180 | 45.0 | 30 | 22.0 | ISO 4762 / GB/T 70.1 |
| M36 | 4.0 | 200 | 54.0 | 36 | 27.0 | ISO 4762 / GB/T 70.1 |
Companion Standards
GB/T 825 controls only the geometry of lifting eye bolt — gb/t 825 / din 580 (series 036). Surface finish is governed by separate finish standards (for example ISO 4042 for electroplating), and corrosion testing by ISO 9227 (neutral salt spray). Mechanical performance is set by the standards specific to this part family, not by ISO 898-1 or ISO 898-2, which apply to bolts, screws and nuts.
When to Specify GB/T 825
Choose GB/T 825 for international engineering work and OEM supply where ISO standards are the contractual reference. It is the default modern specification for lifting eye bolt — gb/t 825 / din 580 (series 036).
