Industry standard is the international standard for u-bolts. This page sets out what the standard governs, the size range it specifies, and the related standards you will see referenced in datasheets.
Industry standard — Scope
Industry standard specifies the dimensions and tolerances of u-bolts. Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).
Tolerance & Product Grades
Industry standard, alongside the related Industry standard entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.
Dimensions Specified by Industry standard
| Thread size | Pitch (mm) | Inside width A (mm) | Inside height / leg length B (mm) | Pipe size ref | Thread length (mm) | Reference standard | Notes |
|---|---|---|---|---|---|---|---|
| M6 | 1.0 | 27 | 60 | 3/4 in | 25 | Industry standard | Round-bend U-bolt with 2 nuts |
| M8 | 1.25 | 34 | 75 | 1 in | 30 | Industry standard | Round-bend U-bolt with 2 nuts |
| M8 | 1.25 | 43 | 90 | 1-1/4 in | 30 | Industry standard | Round-bend U-bolt with 2 nuts |
| M10 | 1.5 | 49 | 110 | 1-1/2 in | 35 | Industry standard | Round-bend U-bolt with 2 nuts |
| M10 | 1.5 | 62 | 120 | 2 in | 35 | Industry standard | Round-bend U-bolt with 2 nuts |
| M12 | 1.75 | 77 | 140 | 2-1/2 in | 40 | Industry standard | Round-bend U-bolt with 2 nuts |
| M12 | 1.75 | 90 | 160 | 3 in | 40 | Industry standard | Round-bend U-bolt with 2 nuts |
| M16 | 2.0 | 115 | 200 | 4 in | 50 | Industry standard | Round-bend U-bolt with 2 nuts |
| M16 | 2.0 | 140 | 220 | 5 in | 50 | Industry standard | Round-bend U-bolt with 2 nuts |
| M20 | 2.5 | 168 | 260 | 6 in | 60 | Industry standard | Round-bend U-bolt with 2 nuts |
Companion Standards
Industry standard controls only the geometry of u-bolts. The mechanical strength is set by ISO 898-1 (bolts and screws) or ISO 898-2 (nuts); the surface finish is governed by separate finish standards (e.g. ISO 4042 for electroplating). For corrosion testing, the relevant document is ISO 9227 (neutral salt spray).
When to Specify Industry standard
Choose Industry standard for international engineering work and OEM supply where ISO standards are the contractual reference. It is the default modern specification for u-bolts.