Specification summary of ISO 14583 as applied to pin-in-torx security screws: the dimensions the standard controls, the tolerance and product grades it defines, the full specified size range, and the equivalent DIN/ISO/ASME designations.
ISO 14583 — Scope
ISO 14583 specifies the dimensions and tolerances of pin-in-torx security screws. Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).
Tolerance & Product Grades
ISO 14583, alongside the related ISO 14583 entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.
Dimensions Specified by ISO 14583
| Thread size | Pitch (mm) | Head diameter dk (mm) | Head height k (mm) | Drive | Security bit | Common length range (mm) | Reference standard |
|---|---|---|---|---|---|---|---|
| M3 | 0.5 | 5.6 | 2.4 | Pin-in-Torx | TR10 | 6~30 | ISO 14583 |
| M4 | 0.7 | 8.0 | 3.1 | Pin-in-Torx | TR20 | 8~40 | ISO 14583 |
| M5 | 0.8 | 9.5 | 3.7 | Pin-in-Torx | TR25 | 8~50 | ISO 14583 |
| M6 | 1.0 | 12.0 | 4.6 | Pin-in-Torx | TR30 | 10~60 | ISO 14583 |
| M8 | 1.25 | 16.0 | 6.0 | Pin-in-Torx | TR40 | 12~60 | ISO 14583 |
Companion Standards
ISO 14583 controls only the geometry of pin-in-torx security screws. The mechanical strength is set by ISO 898-1 (bolts and screws) or ISO 898-2 (nuts); the surface finish is governed by separate finish standards (e.g. ISO 4042 for electroplating). For corrosion testing, the relevant document is ISO 9227 (neutral salt spray).
When to Specify ISO 14583
Choose ISO 14583 for international engineering work and OEM supply where ISO standards are the contractual reference. It is the default modern specification for pin-in-torx security screws.
