Blind Pop Rivet — GB/T 12618 / ISO 15983 (Series 098) manufactured to ISO 15983 follow a specific scope. This page summarizes that scope, lists every dimension the standard fixes, and points to the most common cross-references.
ISO 15983 — Scope
ISO 15983 specifies the dimensions and tolerances of blind pop rivet — gb/t 12618 / iso 15983 (series 098). Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).
Tolerance & Product Grades
ISO 15983, alongside the related GB/T 12618 / ISO 15983 entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.
Dimensions Specified by ISO 15983
| Nominal diameter (mm) | Grip range (mm) | Cap diameter dk (mm) | Free length L (mm) | Body / mandrel material | Reference standard |
|---|---|---|---|---|---|
| 2.4 | 0.5~3.0 | 5.0 | 7.0 | Aluminum / steel | ISO 15977 / DIN 7337 |
| 3.0 | 0.5~4.0 | 6.0 | 8.0 | Aluminum / steel | ISO 15977 / DIN 7337 |
| 3.2 | 0.5~6.0 | 6.4 | 10.0 | Aluminum / steel | ISO 15977 / DIN 7337 |
| 4.0 | 0.5~6.0 | 8.0 | 12.0 | Aluminum / steel | ISO 15977 / DIN 7337 |
| 4.8 | 0.5~8.0 | 9.5 | 14.0 | Aluminum / steel | ISO 15977 / DIN 7337 |
| 5.0 | 1.0~10.0 | 10.0 | 16.0 | Stainless / stainless | ISO 15977 / DIN 7337 |
| 6.0 | 1.5~12.0 | 12.0 | 18.0 | Stainless / stainless | ISO 15977 / DIN 7337 |
Equivalent Standards
Where direct equivalents exist (ISO ↔ DIN, ISO ↔ ASME), they are listed on the parent Blind Pop Rivet — GB/T 12618 / ISO 15983 (Series 098) page. Always confirm against the dimensions on this page, since some "equivalent" standards differ in tolerances and head geometry.
Companion Standards
ISO 15983 controls only the geometry of blind pop rivet — gb/t 12618 / iso 15983 (series 098). The mechanical strength is set by ISO 898-1 (bolts and screws) or ISO 898-2 (nuts); the surface finish is governed by separate finish standards (e.g. ISO 4042 for electroplating). For corrosion testing, the relevant document is ISO 9227 (neutral salt spray).