ISO 1665 is the international standard for hex flange bolts. This page sets out what the standard governs, the size range it specifies, and the related standards you will see referenced in datasheets.
ISO 1665 — Scope
ISO 1665 specifies the dimensions and tolerances of hex flange bolts. Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).
Tolerance & Product Grades
ISO 1665, alongside the related ISO 1665 / DIN 6921 entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.
Dimensions Specified by ISO 1665
| Size | Pitch (mm) | Flange diameter dc (mm) | Head height k (mm) | Width across flats s (mm) | Reference standard |
|---|---|---|---|---|---|
| M5 | 0.8 | 11.8 | 4.7 | 8.0 | ISO 1665 / DIN 6921 |
| M6 | 1.0 | 14.2 | 5.6 | 10.0 | ISO 1665 / DIN 6921 |
| M8 | 1.25 | 17.9 | 7.2 | 13.0 | ISO 1665 / DIN 6921 |
| M10 | 1.5 | 21.8 | 8.9 | 15.0 | ISO 1665 / DIN 6921 |
| M12 | 1.75 | 26.0 | 10.7 | 18.0 | ISO 1665 / DIN 6921 |
| M14 | 2.0 | 29.9 | 12.3 | 21.0 | ISO 1665 / DIN 6921 |
| M16 | 2.0 | 34.5 | 14.1 | 24.0 | ISO 1665 / DIN 6921 |
| M20 | 2.5 | 42.8 | 17.5 | 30.0 | ISO 1665 / DIN 6921 |
| M24 | 3.0 | 51.1 | 21.0 | 36.0 | ISO 1665 / DIN 6921 |
Companion Standards
ISO 1665 controls only the geometry of hex flange bolts. The mechanical strength is set by ISO 898-1 (bolts and screws) or ISO 898-2 (nuts); the surface finish is governed by separate finish standards (e.g. ISO 4042 for electroplating). For corrosion testing, the relevant document is ISO 9227 (neutral salt spray).
When to Specify ISO 1665
Choose ISO 1665 for international engineering work and OEM supply where ISO standards are the contractual reference. It is the default modern specification for hex flange bolts.