ISO 4032 is the international standard for reinforcement plate (h-028) — gb/t 6170 / iso 4032 (series 065). This page sets out what the standard governs, the size range it specifies, and the related standards you will see referenced in datasheets.
ISO 4032 — Scope
ISO 4032 specifies the dimensions and tolerances of reinforcement plate (h-028) — gb/t 6170 / iso 4032 (series 065). Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).
Tolerance & Product Grades
ISO 4032, alongside the related GB/T 6170 / ISO 4032 entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.
Dimensions Specified by ISO 4032
| Size designation | Outer diameter / width (mm) | Length / height (mm) | Bore / thread (mm) | Material | Reference standard |
|---|---|---|---|---|---|
| Size 1 | 10 | 20 | 6 | C45 carbon steel | GB/T 1804-m |
| Size 2 | 12 | 25 | 8 | C45 carbon steel | GB/T 1804-m |
| Size 3 | 16 | 32 | 10 | C45 carbon steel | GB/T 1804-m |
| Size 4 | 20 | 40 | 12 | C45 carbon steel | GB/T 1804-m |
| Size 5 | 25 | 50 | 16 | C45 carbon steel | GB/T 1804-m |
| Size 6 | 32 | 63 | 20 | C45 carbon steel | GB/T 1804-m |
| Size 7 | 40 | 80 | 25 | C45 carbon steel | GB/T 1804-m |
| Size 8 | 50 | 100 | 30 | C45 carbon steel | GB/T 1804-m |
Companion Standards
ISO 4032 controls only the geometry of reinforcement plate (h-028) — gb/t 6170 / iso 4032 (series 065). The mechanical strength is set by ISO 898-1 (bolts and screws) or ISO 898-2 (nuts); the surface finish is governed by separate finish standards (e.g. ISO 4042 for electroplating). For corrosion testing, the relevant document is ISO 9227 (neutral salt spray).
When to Specify ISO 4032
Choose ISO 4032 for international engineering work and OEM supply where ISO standards are the contractual reference. It is the default modern specification for reinforcement plate (h-028) — gb/t 6170 / iso 4032 (series 065).