Socket Head Cap Screw — GB/T 70.1 / ISO 4762 (Series 014) manufactured to T 70.1 follow a specific scope. This page summarizes that scope, lists every dimension the standard fixes, and points to the most common cross-references.
T 70.1 — Scope
T 70.1 specifies the dimensions and tolerances of socket head cap screw — gb/t 70.1 / iso 4762 (series 014). Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).
Tolerance & Product Grades
T 70.1, alongside the related GB/T 70.1 / ISO 4762 entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.
Dimensions Specified by T 70.1
| Size | Pitch (mm) | Length L (mm) | Head diameter dk (mm) | Head height k (mm) | Hex socket s (mm) | Reference standard |
|---|---|---|---|---|---|---|
| M3 | 0.5 | 20 | 5.5 | 3 | 2.5 | ISO 4762 / GB/T 70.1 |
| M4 | 0.7 | 25 | 7.0 | 4 | 3.0 | ISO 4762 / GB/T 70.1 |
| M5 | 0.8 | 30 | 8.5 | 5 | 4.0 | ISO 4762 / GB/T 70.1 |
| M6 | 1.0 | 40 | 10.0 | 6 | 5.0 | ISO 4762 / GB/T 70.1 |
| M8 | 1.25 | 50 | 13.0 | 8 | 6.0 | ISO 4762 / GB/T 70.1 |
| M10 | 1.5 | 60 | 16.0 | 10 | 8.0 | ISO 4762 / GB/T 70.1 |
| M12 | 1.75 | 80 | 18.0 | 12 | 10.0 | ISO 4762 / GB/T 70.1 |
| M14 | 2.0 | 80 | 21.0 | 14 | 12.0 | ISO 4762 / GB/T 70.1 |
| M16 | 2.0 | 100 | 24.0 | 16 | 14.0 | ISO 4762 / GB/T 70.1 |
| M18 | 2.5 | 100 | 27.0 | 18 | 14.0 | ISO 4762 / GB/T 70.1 |
| M20 | 2.5 | 120 | 30.0 | 20 | 17.0 | ISO 4762 / GB/T 70.1 |
| M24 | 3.0 | 150 | 36.0 | 24 | 19.0 | ISO 4762 / GB/T 70.1 |
| M30 | 3.5 | 180 | 45.0 | 30 | 22.0 | ISO 4762 / GB/T 70.1 |
| M36 | 4.0 | 200 | 54.0 | 36 | 27.0 | ISO 4762 / GB/T 70.1 |
Equivalent Standards
Where direct equivalents exist (ISO ↔ DIN, ISO ↔ ASME), they are listed on the parent Socket Head Cap Screw — GB/T 70.1 / ISO 4762 (Series 014) page. Always confirm against the dimensions on this page, since some "equivalent" standards differ in tolerances and head geometry.
Companion Standards
T 70.1 controls only the geometry of socket head cap screw — gb/t 70.1 / iso 4762 (series 014). The mechanical strength is set by ISO 898-1 (bolts and screws) or ISO 898-2 (nuts); the surface finish is governed by separate finish standards (e.g. ISO 4042 for electroplating). For corrosion testing, the relevant document is ISO 9227 (neutral salt spray).