For slotted round nut, small series, T 810 defines the dimensions, tolerances and product grades. The sections below describe the scope of the document, the properties it deliberately leaves to companion standards, and the equivalent designations across standards bodies.
T 810 — Scope
T 810 specifies the dimensions and tolerances of slotted round nut, small series — gb/t 810 (series 074). Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).
Tolerance & Product Grades
T 810, alongside the related GB/T 810 entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.
Dimensions Specified by T 810
| Size | Pitch (mm) | Outer diameter D (mm) | Nut height m (mm) | Slot width (mm) | Slot depth (mm) | Reference standard |
|---|---|---|---|---|---|---|
| M10x1.0 | 1.0 | 18 | 8 | 3 | 2 | GB/T 812 / DIN 1804 |
| M12x1.25 | 1.25 | 22 | 8 | 3 | 2 | GB/T 812 / DIN 1804 |
| M16x1.5 | 1.5 | 28 | 8 | 4 | 2.5 | GB/T 812 / DIN 1804 |
| M20x1.5 | 1.5 | 34 | 10 | 4 | 2.5 | GB/T 812 / DIN 1804 |
| M24x1.5 | 1.5 | 40 | 10 | 5 | 3 | GB/T 812 / DIN 1804 |
| M30x1.5 | 1.5 | 48 | 12 | 5 | 3 | GB/T 812 / DIN 1804 |
| M36x1.5 | 1.5 | 58 | 12 | 6 | 3 | GB/T 812 / DIN 1804 |
| M48x1.5 | 1.5 | 72 | 15 | 6 | 4 | GB/T 812 / DIN 1804 |
| M60x2.0 | 2.0 | 90 | 18 | 7 | 4 | GB/T 812 / DIN 1804 |
| M80x2.0 | 2.0 | 115 | 20 | 8 | 5 | GB/T 812 / DIN 1804 |
| M100x2.0 | 2.0 | 140 | 22 | 10 | 5 | GB/T 812 / DIN 1804 |
Companion Standards
T 810 controls only the geometry of slotted round nut, small series — gb/t 810 (series 074). The mechanical strength is set by ISO 898-1 (bolts and screws) or ISO 898-2 (nuts); the surface finish is governed by separate finish standards (e.g. ISO 4042 for electroplating). For corrosion testing, the relevant document is ISO 9227 (neutral salt spray).
When to Specify T 810
Choose T 810 for international engineering work and OEM supply where ISO standards are the contractual reference. It is the default modern specification for slotted round nut, small series — gb/t 810 (series 074).