T 812 is the international standard for slotted round nut — gb/t 812 (series 069). This page sets out what the standard governs, the size range it specifies, and the related standards you will see referenced in datasheets.
T 812 — Scope
T 812 specifies the dimensions and tolerances of slotted round nut — gb/t 812 (series 069). Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).
Tolerance & Product Grades
T 812, alongside the related GB/T 812 entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.
Dimensions Specified by T 812
| Size | Pitch (mm) | Outer diameter D (mm) | Nut height m (mm) | Slot width (mm) | Slot depth (mm) | Reference standard |
|---|---|---|---|---|---|---|
| M10x1.0 | 1.0 | 18 | 8 | 3 | 2 | GB/T 812 / DIN 1804 |
| M12x1.25 | 1.25 | 22 | 8 | 3 | 2 | GB/T 812 / DIN 1804 |
| M16x1.5 | 1.5 | 28 | 8 | 4 | 2.5 | GB/T 812 / DIN 1804 |
| M20x1.5 | 1.5 | 34 | 10 | 4 | 2.5 | GB/T 812 / DIN 1804 |
| M24x1.5 | 1.5 | 40 | 10 | 5 | 3 | GB/T 812 / DIN 1804 |
| M30x1.5 | 1.5 | 48 | 12 | 5 | 3 | GB/T 812 / DIN 1804 |
| M36x1.5 | 1.5 | 58 | 12 | 6 | 3 | GB/T 812 / DIN 1804 |
| M48x1.5 | 1.5 | 72 | 15 | 6 | 4 | GB/T 812 / DIN 1804 |
| M60x2.0 | 2.0 | 90 | 18 | 7 | 4 | GB/T 812 / DIN 1804 |
| M80x2.0 | 2.0 | 115 | 20 | 8 | 5 | GB/T 812 / DIN 1804 |
| M100x2.0 | 2.0 | 140 | 22 | 10 | 5 | GB/T 812 / DIN 1804 |
Companion Standards
T 812 controls only the geometry of slotted round nut — gb/t 812 (series 069). The mechanical strength is set by ISO 898-1 (bolts and screws) or ISO 898-2 (nuts); the surface finish is governed by separate finish standards (e.g. ISO 4042 for electroplating). For corrosion testing, the relevant document is ISO 9227 (neutral salt spray).
When to Specify T 812
Choose T 812 for international engineering work and OEM supply where ISO standards are the contractual reference. It is the default modern specification for slotted round nut — gb/t 812 (series 069).