Skip to content
info@engineeringhardware.com
Request a Quote

General Components · GB/T 97.1 / ISO 7089

T 97.1 GL-XLC Rotating Shaft — GB/T 97.1 / ISO 7089 (Series 085)

T 97.1 is the international standard for gl-xlc rotating shaft — gb/t 97.1 / iso 7089 (series 085). This page sets out what the standard governs, the size range it specifies, and the related standards you will see referenced in datasheets.

T 97.1 — Scope

T 97.1 specifies the dimensions and tolerances of gl-xlc rotating shaft — gb/t 97.1 / iso 7089 (series 085). Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).

Tolerance & Product Grades

T 97.1, alongside the related GB/T 97.1 / ISO 7089 entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.

Dimensions Specified by T 97.1

Size designationOuter diameter / width (mm)Length / height (mm)Bore / thread (mm)MaterialReference standard
Size 110206C45 carbon steelGB/T 1804-m
Size 212258C45 carbon steelGB/T 1804-m
Size 3163210C45 carbon steelGB/T 1804-m
Size 4204012C45 carbon steelGB/T 1804-m
Size 5255016C45 carbon steelGB/T 1804-m
Size 6326320C45 carbon steelGB/T 1804-m
Size 7408025C45 carbon steelGB/T 1804-m
Size 85010030C45 carbon steelGB/T 1804-m

Companion Standards

T 97.1 controls only the geometry of gl-xlc rotating shaft — gb/t 97.1 / iso 7089 (series 085). The mechanical strength is set by ISO 898-1 (bolts and screws) or ISO 898-2 (nuts); the surface finish is governed by separate finish standards (e.g. ISO 4042 for electroplating). For corrosion testing, the relevant document is ISO 9227 (neutral salt spray).

When to Specify T 97.1

Choose T 97.1 for international engineering work and OEM supply where ISO standards are the contractual reference. It is the default modern specification for gl-xlc rotating shaft — gb/t 97.1 / iso 7089 (series 085).

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (GB/T 97.1 / ISO 7089)

Size designationOuter diameter / width (mm)Length / height (mm)Bore / thread (mm)MaterialReference standard
Size 110206C45 carbon steelGB/T 1804-m
Size 212258C45 carbon steelGB/T 1804-m
Size 3163210C45 carbon steelGB/T 1804-m
Size 4204012C45 carbon steelGB/T 1804-m
Size 5255016C45 carbon steelGB/T 1804-m
Size 6326320C45 carbon steelGB/T 1804-m
Size 7408025C45 carbon steelGB/T 1804-m
Size 85010030C45 carbon steelGB/T 1804-m

Frequently Asked Questions

What product grades does T 97.1 define?

T 97.1 typically distinguishes product grades for precision (A/B) and general engineering (C). The selection for GL-XLC Rotating Shaft — GB/T 97.1 / ISO 7089 (Series 085) depends on the precision your application requires.

Does T 97.1 specify the mechanical strength?

No. T 97.1 controls only the geometry of gl-xlc rotating shaft — gb/t 97.1 / iso 7089 (series 085). The mechanical strength is set by ISO 898-1 (bolts / screws) or ISO 898-2 (nuts), and the finish is governed by separate standards.

Can I substitute T 97.1 for the corresponding DIN standard on a drawing?

On modern drawings the ISO standard is the master reference; the older DIN equivalent is a cross-reference. For most dimensional purposes the parts are interchangeable, but check tolerance grades and the head height — these are the most common points of divergence.

When did T 97.1 last revise its dimensional table?

ISO standards for gl-xlc rotating shaft — gb/t 97.1 / iso 7089 (series 085) are reviewed on roughly a five-year cycle. Always reference the latest published edition (or the edition cited contractually); the dimensional table on this page reflects the current commercially-supplied form.

How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.