6 catalogued sizes, dimensioned to Trade series (screw-shank nails). Pick any row and the technical drawing redraws to it.
Screw-Shank Nails to Trade series (screw-shank nails) are catalogued in long 2-4 mm, with dia 0.12-0.18 mm, head 0.28-0.44 mm. 6 sizes are held in the table below, and the technical drawing redraws to whichever row you select.
Standard
Trade series (screw-shank nails)
Long
2-4 mm
Dia
0.12-0.18 mm
Head
0.28-0.44 mm
Catalogued sizes
6
Dimensions are nominal values from the governing standard. Confirm the tolerance class for your application before ordering.
Screw-Shank Nails — Trade series (screw-shank nails)
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Request a Quotation for Screw-Shank Nails
The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.
Dimensions & Specifications (Trade series (screw-shank nails))
Every row below is a starting point for the customizer above — pick any size and the drawing will redraw to that row.
Gauge
Length (in)
Shank diameter (in)
Head diameter (in)
Thread form
Coating / material
6
2
0.12
0.281
spiral
bright or electro-galvanized
8
2.5
0.12
0.281
spiral
electro-galvanized or hot-dip-galvanized
10
3
0.135
0.312
spiral
hot-dip-galvanized or 304 stainless
16
3.5
0.162
0.375
ring
hot-dip-galvanized
20
4
0.177
0.438
ring
hot-dip-galvanized
16
3
0.148
0.312
spiral
316 stainless
Screw-Shank Nails conform to Trade series (screw-shank nails). As nails, they are specified by the dimensions in the table below; this page also covers materials, finishes and typical uses.
What Are Screw-Shank Nails?
Screw-Shank Nails are nails defined by Trade series (screw-shank nails). They are selected by nominal diameter and the dimensional characteristics shown below, and are available in a range of materials and finishes to suit the application and environment.
Materials & Finishes
Common materials include carbon steel (typically zinc plated or hot-dip galvanized), hardened or case-hardened steel where wear matters, and stainless steel A2 (304) or A4 (316) for corrosion resistance. Specify the material, hardness where relevant, and the surface finish appropriate to your application and environment.
Screw-Shank Nails are supplied to order. Pricing starts from approximately US$0.030 per piece for standard sizes in carbon steel; final pricing depends on size, material, finish and order quantity (MOQ applies). Submit your exact configuration with the quote form above.
Screw-Shank Nails — Trade series (screw-shank nails)
This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.
01
Cold heading
Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.
Head dimensions and under-head radius checked at set-up and per shift.
02
Thread rolling
Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.
Go / no-go ring gauges to ISO 965 tolerance class 6g.
03
Heat treatment
Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.
Core hardness and tensile tested per lot to ISO 898-1.
04
Surface treatment
Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.
Coating thickness and neutral salt spray hours to ISO 9227.
Frequently Asked Questions
Which standard governs Screw-Shank Nails?
Screw-Shank Nails are manufactured to Trade series (screw-shank nails). The dimensional values on this page follow that standard.
What sizes are available for Screw-Shank Nails?
The table on this page lists 6 sizes for Screw-Shank Nails, ranging from 6 to 16. Sizes outside the table can be quoted on request.
In which materials are Screw-Shank Nails supplied?
Screw-Shank Nails are supplied in low-carbon and medium-carbon steel, with finishes including zinc plating, hot-dip galvanizing and black oxide. Choose material and finish to suit the load and the service environment for Screw-Shank Nails.
How do I request a quotation?
Use the parametric drawing on this page to set the exact configuration (size, material, finish) and click "Request this configuration" — a specialist from Engineering Hardware will respond within one business day.
Need a fastener quote or a spec sheet?Message our engineers on WhatsApp — send a drawing or DIN number and get pricing back fast.Start WhatsApp Chat →
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
