3 catalogued sizes, dimensioned to ASME B30.26. Pick any row and the technical drawing redraws to it.
Screw-Pin Anchor Shackles to ASME B30.26: the full dimensional table is reproduced below. 3 sizes are held in the table below, and the technical drawing redraws to whichever row you select.
Standard
ASME B30.26
Catalogued sizes
3
Dimensions are nominal values from the governing standard. Confirm the tolerance class for your application before ordering.
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Request a Quotation for Screw-Pin Anchor Shackles
The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.
Dimensions & Specifications (ASME B30.26)
Every row below is a starting point for the customizer above — pick any size and the drawing will redraw to that row.
Body
Pin type
Suitable for
Not suitable for
anchor (bow)
screw pin
frequent connection and disconnection
long-term or unattended installation
anchor (bow), galvanised
screw pin
frequent connection and disconnection
loads that can rotate the pin
anchor (bow)
bolt, nut and split pin
long-term and unattended installation
Screw-Pin Anchor Shackles (ASME B30.26) are a type of rigging hardware used across industrial assembly. Below is the complete size table together with material, standard and application guidance.
What Are Screw-Pin Anchor Shackles?
Screw-Pin Anchor Shackles are rigging hardware defined by ASME B30.26. They are selected by rope diameter and the dimensional characteristics shown below, and are available in a range of materials and finishes to suit the application and environment.
Materials & Finishes
Rigging items are supplied in galvanized or stainless steel and are specified by working load limit and the design factor applied to it, together with the finish appropriate to the environment. The rated capacity, not the material alone, is the governing figure.
Specification Guides
Each size, material and standard of Screw-Pin Anchor Shackles has its own reference page with the figures for that one configuration.
Screw-Pin Anchor Shackles are supplied to order. Pricing starts from approximately US$1.40 per piece for standard sizes in galvanized steel at the catalog working load limit; final pricing depends on size, material, finish and order quantity (MOQ applies). Submit your exact configuration with the quote form above.
This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.
01
Cold heading
Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.
Head dimensions and under-head radius checked at set-up and per shift.
02
Thread rolling
Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.
Go / no-go ring gauges to ISO 965 tolerance class 6g.
03
Heat treatment
Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.
Core hardness and tensile tested per lot to ISO 898-1.
04
Surface treatment
Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.
Coating thickness and neutral salt spray hours to ISO 9227.
Frequently Asked Questions
What is the controlling standard for Screw-Pin Anchor Shackles?
Screw-Pin Anchor Shackles are manufactured to ASME B30.26. The dimensional values on this page follow that standard.
What sizes are available for Screw-Pin Anchor Shackles?
The table on this page lists 3 sizes for Screw-Pin Anchor Shackles, ranging from anchor (bow) to anchor (bow). Sizes outside the table can be quoted on request.
In which materials are Screw-Pin Anchor Shackles supplied?
Screw-Pin Anchor Shackles are supplied in galvanized and stainless steel, rated by working load limit, with finishes including zinc plating, hot-dip galvanizing and black oxide. Choose material and finish to suit the load and the service environment for Screw-Pin Anchor Shackles.
How do I request a quotation?
Use the parametric drawing on this page to set the exact configuration (size, material, finish) and click "Request this configuration" — a specialist from Engineering Hardware will respond within one business day.
Need a fastener quote or a spec sheet?Message our engineers on WhatsApp — send a drawing or DIN number and get pricing back fast.Start WhatsApp Chat →
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
