Skip to content
info@engineeringhardware.com
WhatsApp
Request a Quote
Standoffs & Spacers · Trade series (adhesive-backed threaded studs) · Application guide

What Are Adhesive-Mount Threaded Studs Used For?

Typical applications, the industries that specify adhesive-mount threaded studs, and how to choose the right size, material and finish for the joint.

Adhesive-Mount Threaded Studs are used for adding a projecting threaded attachment to a finished surface by bonding a base. They are manufactured to Trade series (adhesive-backed threaded studs), and selection is driven by the thread size, the fit and tolerance the assembly requires, and the service environment.

Primary duty
Adding a projecting threaded attachment to a finished surface by bonding a base
Governing standard
Trade series (adhesive-backed threaded studs)
Thread size range
M6 to M6
Category
Standoffs & Spacers

Application notes are general engineering guidance. Verify the property class and any approval requirement against your own design calculation.

What Are Adhesive-Mount Threaded Studs Used For? application image

Adhesive-Mount Threaded Studs (Trade series (adhesive-backed threaded studs)) are specified where the joint requires adding a projecting threaded attachment to a finished surface by bonding a base. The sections below cover the typical end-uses by industry, the size and material decisions for each, assembly practice, and the applications this fastener type is not suited to. Stocked across roughly M6 to M6, they cover light-duty and instrument-scale work.

Typical Applications for Adhesive-Mount Threaded Studs

The most common settings where these are specified:

  • Vehicle interiors: Adhesive-backed studs provide a projecting attachment without drilling the finished trim.
  • Electrical panels: M6 studs mount covers and clips from the front side.
  • Signs and displays: Stainless and plated-steel options follow the exposure.
  • Retrofit equipment: A 23 or 38 mm base spreads the bond area behind a panel.

How to Specify Adhesive-Mount Threaded Studs for Your Application

  • Size: Match the nominal size to the mating thread or hole. This product spans M6–M6; check the full table below for the exact dimensions of each size.
  • Material: Choose the material and finish for the service environment — plated steel for general use, stainless for corrosion resistance.
  • Environment: For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
  • Standard: This product is supplied to Trade series (adhesive-backed threaded studs). Quoting the standard on your order guarantees interchangeable dimensions between suppliers.

Where Adhesive-Mount Threaded Studs Are Not the Right Choice

Match the fastener to the load, environment and whether the joint must be reopened; the wrong class or style is the usual cause of joint failure.

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (Trade series (adhesive-backed threaded studs))

Thread sizeBase diameter (mm)Base thickness (mm)Base hole (mm)Stud length options (mm)Material options
M623 or 381.2512 / 16stainless steel / zinc-plated steel
Inside the plant

Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

  1. Wire rod feeding into a cold heading machine
    01

    Cold heading

    Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.

    Head dimensions and under-head radius checked at set-up and per shift.

  2. Thread rolling machine producing bolt threads
    02

    Thread rolling

    Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.

    Go / no-go ring gauges to ISO 965 tolerance class 6g.

  3. Baskets of bolts staged for heat treatment
    03

    Heat treatment

    Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.

    Core hardness and tensile tested per lot to ISO 898-1.

  4. Zinc plated bolts in a treatment basket
    04

    Surface treatment

    Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.

    Coating thickness and neutral salt spray hours to ISO 9227.

Frequently Asked Questions

Which industries use Adhesive-Mount Threaded Studs?

They are commonly specified in signs and displays, retrofit equipment and vehicle interiors, among other sectors.

How do I choose the right size of Adhesive-Mount Threaded Studs?

Match the nominal size to the mating thread or hole. This product is available from M6 to M6; the full dimension table on this page lists each size.

What material should Adhesive-Mount Threaded Studs be for outdoor use?

For damp, coastal or chemical environments specify A4 (316) stainless or a suitably coated steel. For indoor or dry use, A2 (304) stainless or zinc-plated steel is normally adequate.

Are Adhesive-Mount Threaded Studs made to a recognized standard?

Yes — they are manufactured to Trade series (adhesive-backed threaded studs), so dimensions are interchangeable between suppliers when you quote the standard on your order.

Can I get a quote for Adhesive-Mount Threaded Studs in the size and material I need?

Yes. Use the technical drawing and quote form on this page to set the size and options, then send the exact configuration to our team for pricing and lead time.