Skip to content
info@engineeringhardware.com
WhatsApp
Request a Quote
Nails · Trade series (landscape staples) · Application guide

What Are Landscape Fabric Staples and Sod Staples Used For?

Typical applications, the industries that specify landscape fabric staples and sod staples, and how to choose the right size, material and finish for the joint.

Landscape Fabric Staples and Sod Staples are used for pinning fabric, sod and erosion blankets to soil with a U-shaped steel staple. They are manufactured to Trade series (landscape staples), and selection is driven by the nominal size, the fit and tolerance the assembly requires, and the service environment.

Primary duty
Pinning fabric, sod and erosion blankets to soil with a U-shaped steel staple
Governing standard
Trade series (landscape staples)
Nominal size range
4 u00d7 1 to 10 u00d7 2 u00d7 10
Category
Nails

Application notes are general engineering guidance. Verify the property class and any approval requirement against your own design calculation.

What Are Landscape Fabric Staples and Sod Staples Used For? application image

Landscape Fabric Staples and Sod Staples (Trade series (landscape staples)) are specified where the joint requires pinning fabric, sod and erosion blankets to soil with a U-shaped steel staple. The sections below cover the typical end-uses by industry, the size and material decisions for each, assembly practice, and the applications this fastener type is not suited to. Stocked across roughly 4 mm to 10 mm, they cover general to heavy-duty work.

Typical Applications for Landscape Fabric Staples and Sod Staples

The most common settings where these are specified:

  • Landscape installation: Steel U-staples hold fabric, sod and erosion blankets to soil.
  • Erosion control: Longer staples retain netting and blankets during surface establishment.
  • Garden construction: 4–10 in sizes cover common fabric and sod layouts.
  • Outdoor maintenance: Raw or galvanized steel options follow the expected exposure.

How to Specify Landscape Fabric Staples and Sod Staples for Your Application

  • Size: Select on nominal size, and confirm it against the mating feature in the assembly. This product spans 4 mm–10 mm; check the full table below for the exact dimensions of each size.
  • Material: Choose the material and finish for the service environment — plated steel for general use, stainless for corrosion resistance.
  • Environment: For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
  • Standard: This product is supplied to Trade series (landscape staples). Quoting the standard on your order guarantees interchangeable dimensions between suppliers.

Where Landscape Fabric Staples and Sod Staples Are Not the Right Choice

Not for joints needing later removal or high withdrawal resistance — a screw holds far better in tension.

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (Trade series (landscape staples))

Height u00d7 width (in)Wire gaugeMaterial / finishPackaging examplesUse
4 u00d7 111raw or non-galvanized steel1000 per cartonlandscape fabric, sod and netting
6 u00d7 1 u00d7 611raw or non-galvanized steel500 / 1000 per boxlandscape fabric, sod and erosion blankets
8 u00d7 2 u00d7 811raw steel1000 per boxlandscape fabric and netting
10 u00d7 2 u00d7 108raw steel500 per boxlandscape fabric and erosion blankets
Inside the plant

Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

  1. Wire rod feeding into a cold heading machine
    01

    Cold heading

    Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.

    Head dimensions and under-head radius checked at set-up and per shift.

  2. Thread rolling machine producing bolt threads
    02

    Thread rolling

    Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.

    Go / no-go ring gauges to ISO 965 tolerance class 6g.

  3. Baskets of bolts staged for heat treatment
    03

    Heat treatment

    Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.

    Core hardness and tensile tested per lot to ISO 898-1.

  4. Zinc plated bolts in a treatment basket
    04

    Surface treatment

    Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.

    Coating thickness and neutral salt spray hours to ISO 9227.

Frequently Asked Questions

Which industries use Landscape Fabric Staples and Sod Staples?

They are commonly specified in landscape installation, erosion control and garden construction, among other sectors.

How do I choose the right size of Landscape Fabric Staples and Sod Staples?

Select on nominal size and on the fit the assembly requires. This product is available from 4 mm to 10 mm; the full dimension table on this page lists each size.

Do Landscape Fabric Staples and Sod Staples hold as well as screws?

Nails resist shear well and drive fast, but screws hold far better in withdrawal (tension). Use screws where the joint is loaded in pull-out or may need removal.

Are Landscape Fabric Staples and Sod Staples made to a recognized standard?

Yes — they are manufactured to Trade series (landscape staples), so dimensions are interchangeable between suppliers when you quote the standard on your order.

Can I get a quote for Landscape Fabric Staples and Sod Staples in the size and material I need?

Yes. Use the technical drawing and quote form on this page to set the size and options, then send the exact configuration to our team for pricing and lead time.