15 catalogued sizes, dimensioned to DIN 1152. Pick any row and the technical drawing redraws to it.
Lost Head Wire Nails to DIN 1152: the full dimensional table is reproduced below. 15 sizes are held in the table below, and the technical drawing redraws to whichever row you select.
Standard
DIN 1152
Catalogued sizes
15
Dimensions are nominal values from the governing standard. Confirm the tolerance class for your application before ordering.
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Dimensioned line drawing of 10x15 Lost Head Wire Nails to DIN 1152. Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.
d (mm)
1.0
l (mm)
15
Sends the selected values to the quote form below.
Request a Quotation for Lost Head Wire Nails
The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.
Dimensions & Specifications (DIN 1152)
Every row below is a starting point for the customizer above — pick any size and the drawing will redraw to that row.
Size
d (mm)
l (mm)
Reference standard
10x15
1.0
15
DIN 1152
12x20
1.2
20
DIN 1152
14x25
1.4
25
DIN 1152
16x30
1.6
30
DIN 1152
18x35
1.8
35
DIN 1152
20x40
2.0
40
DIN 1152
22x45
2.2
45
DIN 1152
22x50
2.2
50
DIN 1152
22x55
2.2
55
DIN 1152
25x55
2.5
55
DIN 1152
25x60
2.5
60
DIN 1152
28x65
2.8
65
DIN 1152
31x80
3.1
80
DIN 1152
34x90
3.4
90
DIN 1152
38x100
3.8
100
DIN 1152
Lost Head Wire Nails are nails manufactured to DIN 1152. This page lists the full dimensional range with the key specifications engineers need to select and specify them.
What Are Lost Head Wire Nails?
Lost Head Wire Nails are nails defined by DIN 1152. They are selected by nominal diameter and the dimensional characteristics shown below, and are available in a range of materials and finishes to suit the application and environment.
Materials & Finishes
Common materials include carbon steel (typically zinc plated or hot-dip galvanized), hardened or case-hardened steel where wear matters, and stainless steel A2 (304) or A4 (316) for corrosion resistance. Specify the material, hardness where relevant, and the surface finish appropriate to your application and environment.
Specification Guides
Each size, material and standard of Lost Head Wire Nails has its own reference page with the figures for that one configuration.
Goes With
Hardware commonly specified alongside Lost Head Wire Nails.
Pricing
Lost Head Wire Nails are supplied to order. Pricing starts from approximately US$0.010 per piece for standard sizes in carbon steel; final pricing depends on size, material, finish and order quantity (MOQ applies). Submit your exact configuration with the quote form above.
Custom manufacturing · Made to drawing
Need a lost head wire nails outside the standard range?
Dimensions, material, finish and form are specified from the drawing — a nail outside the standard range is a variation on existing tooling rather than a new design.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.
This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.
01
Cold heading
Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.
Head dimensions and under-head radius checked at set-up and per shift.
02
Thread rolling
Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.
Go / no-go ring gauges to ISO 965 tolerance class 6g.
03
Heat treatment
Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.
Core hardness and tensile tested per lot to ISO 898-1.
04
Surface treatment
Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.
Coating thickness and neutral salt spray hours to ISO 9227.
Video: Lost Head Wire Nails
Third-party video, selected automatically for this topic. It is not produced by Engineering Hardware and is not a specification source — use the tables on this page for dimensional data.
Frequently Asked Questions
What standard are Lost Head Wire Nails manufactured to?
Lost Head Wire Nails are manufactured to DIN 1152. The dimensional values on this page follow that standard.
Which sizes of Lost Head Wire Nails does Engineering Hardware supply?
The table on this page lists 15 sizes for Lost Head Wire Nails, ranging from 10x15 to 38x100. Sizes outside the table can be quoted on request.
In which materials are Lost Head Wire Nails supplied?
Lost Head Wire Nails are supplied in low-carbon and medium-carbon steel, with finishes including zinc plating, hot-dip galvanizing and black oxide. Choose material and finish to suit the load and the service environment for Lost Head Wire Nails.
How do I request a quotation?
Use the parametric drawing on this page to set the exact configuration (size, material, finish) and click "Request this configuration" — a specialist from Engineering Hardware will respond within one business day.
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
