4 catalogued sizes, dimensioned to Trade series (landscape staples). Pick any row and the technical drawing redraws to it.
Landscape Fabric Staples and Sod Staples to Trade series (landscape staples): the full dimensional table is reproduced below. 4 sizes are held in the table below, and the technical drawing redraws to whichever row you select.
Standard
Trade series (landscape staples)
Catalogued sizes
4
Dimensions are nominal values from the governing standard. Confirm the tolerance class for your application before ordering.
Landscape Fabric Staples and Sod Staples — Trade series (landscape staples)
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Dimensioned line drawing of 4 × 1 Landscape Fabric Staples and Sod Staples to Trade series (landscape staples). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.
Wire gauge
11
Material / finish
raw or non-galvanized steel
Packaging examples
1000 per carton
Use
landscape fabric, sod and netting
Sends the selected values to the quote form below.
Request a Quotation for Landscape Fabric Staples and Sod Staples
The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.
Dimensions & Specifications (Trade series (landscape staples))
Every row below is a starting point for the customizer above — pick any size and the drawing will redraw to that row.
Height × width (in)
Wire gauge
Material / finish
Packaging examples
Use
4 × 1
11
raw or non-galvanized steel
1000 per carton
landscape fabric, sod and netting
6 × 1 × 6
11
raw or non-galvanized steel
500 / 1000 per box
landscape fabric, sod and erosion blankets
8 × 2 × 8
11
raw steel
1000 per box
landscape fabric and netting
10 × 2 × 10
8
raw steel
500 per box
landscape fabric and erosion blankets
Manufactured to Trade series (landscape staples), Landscape Fabric Staples and Sod Staples are nails supplied by Engineering Hardware. The dimensional data, materials and selection notes are summarized here.
What Are Landscape Fabric Staples and Sod Staples?
Landscape Fabric Staples and Sod Staples are nails defined by Trade series (landscape staples). They are selected by nominal size and the dimensional characteristics shown below, and are available in a range of materials and finishes to suit the application and environment.
Materials & Finishes
Common materials include carbon steel (typically zinc plated or hot-dip galvanized), hardened or case-hardened steel where wear matters, and stainless steel A2 (304) or A4 (316) for corrosion resistance. Specify the material, hardness where relevant, and the surface finish appropriate to your application and environment.
Goes With
Hardware commonly specified alongside Landscape Fabric Staples and Sod Staples.
Pricing
Landscape Fabric Staples and Sod Staples are supplied to order. Pricing starts from approximately US$0.050 per piece for standard sizes in carbon steel; final pricing depends on size, material, finish and order quantity (MOQ applies). Submit your exact configuration with the quote form above.
Custom manufacturing · Made to drawing
Need a landscape fabric staples and sod staples outside the standard range?
A non-standard nail is quoted from the drawing; where one already exists in the catalog, the special is usually a variation on its tooling.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.
This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.
01
Cold heading
Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.
Head dimensions and under-head radius checked at set-up and per shift.
02
Thread rolling
Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.
Go / no-go ring gauges to ISO 965 tolerance class 6g.
03
Heat treatment
Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.
Core hardness and tensile tested per lot to ISO 898-1.
04
Surface treatment
Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.
Coating thickness and neutral salt spray hours to ISO 9227.
Third-party video, selected automatically for this topic. It is not produced by Engineering Hardware and is not a specification source — use the tables on this page for dimensional data.
Frequently Asked Questions
What standard are Landscape Fabric Staples and Sod Staples manufactured to?
Landscape Fabric Staples and Sod Staples are manufactured to Trade series (landscape staples). The dimensional values on this page follow that standard.
Which sizes of Landscape Fabric Staples and Sod Staples does Engineering Hardware supply?
The table on this page lists 4 sizes for Landscape Fabric Staples and Sod Staples, ranging from 4 × 1 to 10 × 2 × 10. Sizes outside the table can be quoted on request.
In which materials are Landscape Fabric Staples and Sod Staples supplied?
Landscape Fabric Staples and Sod Staples are supplied in low-carbon and medium-carbon steel, with finishes including zinc plating, hot-dip galvanizing and black oxide. Choose material and finish to suit the load and the service environment for Landscape Fabric Staples and Sod Staples.
How do I request a quotation?
Use the parametric drawing on this page to set the exact configuration (size, material, finish) and click "Request this configuration" — a specialist from Engineering Hardware will respond within one business day.
Message our sales engineersUsually replies within one business day
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
