For Hex Slotted Castle Nut (Type 1) — GB/T 6180 / ISO 7036 (Series 049) in A2 Stainless Steel, the controlling decisions are corrosion, strength and service temperature. This guide summarizes those three for A2 Stainless Steel Hex Slotted Castle Nut (Type 1) — GB/T 6180 / ISO 7036 (Series 049) and lists every size we supply.
Why Choose A2 Stainless Steel for Hex Slotted Castle Nut (Type 1) — GB/T 6180 / ISO 7036 (Series 049)
The most common stainless grade for indoor and general outdoor fasteners. For hex slotted castle nut (type 1) — gb/t 6180 / iso 7036 (series 049), this matters when good general corrosion resistance is the primary requirement.
Mechanical & Physical Properties
| Grade designation | A2-70 (304) |
|---|---|
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C |
| Corrosion characteristic | Good general corrosion resistance |
Galvanic & Galling Considerations
Two important notes for stainless hex slotted castle nut (type 1) — gb/t 6180 / iso 7036 (series 049): (1) stainless can gall on stainless threads under load — use a thread lubricant or anti-galling compound, especially for M6 and below; (2) when joined to aluminum or galvanized steel, stainless can drive galvanic corrosion of the less-noble metal in wet service — isolate with a coating or sleeve where appropriate.
Comparable Grades
For Hex Slotted Castle Nut (Type 1) — GB/T 6180 / ISO 7036 (Series 049), the alternative stainless grade is A4 (316). A2 (304) suits general indoor and outdoor service; A4 (316) adds molybdenum for marine and chloride environments. Where higher strength matters more than corrosion, switch to plated alloy-steel class 8.8 or 10.9.
Sizes of Hex Slotted Castle Nut (Type 1) — GB/T 6180 / ISO 7036 (Series 049) Available in A2 Stainless Steel
| Size | Pitch (mm) | Width across flats s (mm) | Width across corners e (mm) | Total height m (mm) | Slot width (mm) | Reference standard |
|---|---|---|---|---|---|---|
| M3 | 0.5 | 5.5 | 6.01 | 4.0 | 1.2 | ISO 7036 / GB/T 6180 |
| M4 | 0.7 | 7.0 | 7.66 | 5.0 | 1.5 | ISO 7036 / GB/T 6180 |
| M5 | 0.8 | 8.0 | 8.79 | 6.7 | 1.8 | ISO 7036 / GB/T 6180 |
| M6 | 1.0 | 10.0 | 11.05 | 7.7 | 2.0 | ISO 7036 / GB/T 6180 |
| M8 | 1.25 | 13.0 | 14.38 | 9.8 | 2.5 | ISO 7036 / GB/T 6180 |
| M10 | 1.5 | 16.0 | 17.77 | 12.4 | 2.8 | ISO 7036 / GB/T 6180 |
| M12 | 1.75 | 18.0 | 20.03 | 15.8 | 3.5 | ISO 7036 / GB/T 6180 |
| M14 | 2.0 | 21.0 | 23.36 | 17.8 | 4.0 | ISO 7036 / GB/T 6180 |
| M16 | 2.0 | 24.0 | 26.75 | 20.8 | 4.5 | ISO 7036 / GB/T 6180 |
| M18 | 2.5 | 27.0 | 30.14 | 22.5 | 4.5 | ISO 7036 / GB/T 6180 |
| M20 | 2.5 | 30.0 | 33.53 | 24.0 | 5.5 | ISO 7036 / GB/T 6180 |
| M24 | 3.0 | 36.0 | 39.98 | 29.5 | 6.0 | ISO 7036 / GB/T 6180 |
| M30 | 3.5 | 46.0 | 50.85 | 36.0 | 7.0 | ISO 7036 / GB/T 6180 |
| M36 | 4.0 | 55.0 | 60.79 | 43.0 | 8.0 | ISO 7036 / GB/T 6180 |