When Clevis Pin — ISO / DIN (Series 101) are required in A2 Stainless Steel, the alternative grades and the trade-offs between them matter as much as the dimensions. This page covers both, plus mechanical and corrosion data.
Why Choose A2 Stainless Steel for Clevis Pin — ISO / DIN (Series 101)
The most common stainless grade for indoor and general outdoor fasteners. For clevis pin — iso / din (series 101), this matters when good general corrosion resistance is the primary requirement.
Mechanical & Physical Properties
| Grade designation | A2-70 (304) |
|---|---|
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C |
| Corrosion characteristic | Good general corrosion resistance |
Corrosion Behavior in Service
A2 (304) gives excellent atmospheric and most-water corrosion resistance and is the most common stainless for Clevis Pin — ISO / DIN (Series 101) in indoor and general outdoor service. In chloride-bearing environments (marine air, road salt, swimming pools) consider stepping up to A4 (316).
Comparable Grades
For Clevis Pin — ISO / DIN (Series 101), the alternative stainless grade is A4 (316). A2 (304) suits general indoor and outdoor service; A4 (316) adds molybdenum for marine and chloride environments. Where higher strength matters more than corrosion, switch to plated alloy-steel class 8.8 or 10.9.
Sizes of Clevis Pin — ISO / DIN (Series 101) Available in A2 Stainless Steel
| Nominal diameter (mm) | Length L (mm) | Head diameter (mm) | Cotter pin hole (mm) | Material | Reference standard |
|---|---|---|---|---|---|
| 3 | 16 | 5 | 1.0 | Carbon steel | ISO 2341 / GB/T 882 |
| 4 | 20 | 7 | 1.2 | Carbon steel | ISO 2341 / GB/T 882 |
| 5 | 25 | 8 | 1.6 | Carbon steel | ISO 2341 / GB/T 882 |
| 6 | 32 | 10 | 1.6 | Carbon steel | ISO 2341 / GB/T 882 |
| 8 | 40 | 12 | 2.0 | Carbon steel | ISO 2341 / GB/T 882 |
| 10 | 50 | 15 | 2.5 | Carbon steel | ISO 2341 / GB/T 882 |
| 12 | 63 | 18 | 3.2 | Carbon steel | ISO 2341 / GB/T 882 |
| 16 | 80 | 22 | 4.0 | Carbon steel | ISO 2341 / GB/T 882 |
| 20 | 100 | 28 | 4.0 | Carbon steel | ISO 2341 / GB/T 882 |