Skip to content

Bearings & Bushings · ISO / DIN

A2 Stainless Steel Deep Groove Ball Bearing

A2 Stainless Steel Deep Groove Ball Bearing reference image

Material specification page for deep groove ball bearing in A2 Stainless Steel. Covers the grade designation (A2-70 (304)), corrosion and magnetic behavior, comparable grades and their trade-offs, and the sizes available to ISO / DIN.

Why Choose A2 Stainless Steel for Deep Groove Ball Bearing — ISO / DIN (Series 132)

The most common stainless grade for indoor and general outdoor fasteners. For deep groove ball bearing — iso / din (series 132), this matters when good general corrosion resistance is the primary requirement.

Mechanical & Physical Properties

Grade designationA2-70 (304)
Magnetic responseLargely non-magnetic
Service temperatureapprox. -200 °C to +400 °C
Corrosion characteristicGood general corrosion resistance

Corrosion Behavior in Service

A2 (304) gives excellent atmospheric and most-water corrosion resistance and is the most common stainless for Deep Groove Ball Bearing — ISO / DIN (Series 132) in indoor and general outdoor service. In chloride-bearing environments (marine air, road salt, swimming pools) consider stepping up to A4 (316).

Comparable Grades

For Deep Groove Ball Bearing — ISO / DIN (Series 132), the alternative stainless grade is A4 (316). A2 (304) suits general indoor and outdoor service; A4 (316) adds molybdenum for marine and chloride environments. Where higher strength matters more than corrosion, switch to plated alloy-steel class 8.8 or 10.9.

Sizes of Deep Groove Ball Bearing — ISO / DIN (Series 132) Available in A2 Stainless Steel

Bore d (mm)Outer diameter D (mm)Width B (mm)Dynamic load C (kN)Limit speed (rpm)Reference standard
103095.132000ISO 15 / GB/T 276
1232106.9528000ISO 15 / GB/T 276
1535117.6524000ISO 15 / GB/T 276
1740129.5622000ISO 15 / GB/T 276
20471412.718000ISO 15 / GB/T 276
25521514.016000ISO 15 / GB/T 276
30621619.513000ISO 15 / GB/T 276
35721725.511000ISO 15 / GB/T 276
40801830.710000ISO 15 / GB/T 276
45851933.29500ISO 15 / GB/T 276
50902035.19000ISO 15 / GB/T 276
601102252.77500ISO 15 / GB/T 276

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (ISO / DIN)

Bore d (mm)Outer diameter D (mm)Width B (mm)Dynamic load C (kN)Limit speed (rpm)Reference standard
103095.132000ISO 15 / GB/T 276
1232106.9528000ISO 15 / GB/T 276
1535117.6524000ISO 15 / GB/T 276
1740129.5622000ISO 15 / GB/T 276
20471412.718000ISO 15 / GB/T 276
25521514.016000ISO 15 / GB/T 276
30621619.513000ISO 15 / GB/T 276
35721725.511000ISO 15 / GB/T 276
40801830.710000ISO 15 / GB/T 276
45851933.29500ISO 15 / GB/T 276
50902035.19000ISO 15 / GB/T 276
601102252.77500ISO 15 / GB/T 276

Frequently Asked Questions

What's the service temperature limit for A2 Stainless Steel?

The practical service range is approx. -200 °C to +400 °C.

Can A2 Stainless Steel replace plated alloy steel structurally?

Only at the standard strength classes — A2-70 / A4-80 are roughly equivalent to class 7 steel; A4-100 reaches class 8.8. For class 10.9 or 12.9 strength, plated alloy steel is required.

Are A2 Stainless Steel Deep Groove Ball Bearing — ISO / DIN (Series 132) magnetic?

A2 Stainless Steel Deep Groove Ball Bearing — ISO / DIN (Series 132) are largely non-magnetic.

What corrosion resistance do A2 Stainless Steel Deep Groove Ball Bearing — ISO / DIN (Series 132) offer?

A2 Stainless Steel Deep Groove Ball Bearing — ISO / DIN (Series 132) provide good general corrosion resistance with a service range of approx. -200 °C to +400 °C.

How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.