Skip to content

Bearings & Bushings · ISO / DIN

Grade 12.9 Steel Deep Groove Ball Bearing — ISO / DIN (Series 132)

Grade 12.9 Steel Deep Groove Ball Bearing — ISO / DIN (Series 132) pairs the standard ISO / DIN with a Grade 12.9 Steel base material. The sections below cover why engineers select this grade for deep groove ball bearing — iso / din (series 132), its corrosion and temperature behavior, and the sizes available.

Why Choose Grade 12.9 Steel for Deep Groove Ball Bearing — ISO / DIN (Series 132)

The highest common strength class, for high-load machine assembly. For deep groove ball bearing — iso / din (series 132), this matters when requires plating or black-oxide protection is the primary requirement.

Mechanical & Physical Properties

Grade designationclass 12.9
Magnetic responseMagnetic
Service temperatureup to approx. +300 °C
Corrosion characteristicRequires plating or black-oxide protection

Galvanic & Galling Considerations

For deep groove ball bearing — iso / din (series 132) in steel, the dominant compatibility issue is hydrogen embrittlement at high property classes (10.9 and above) when electroplated. Plating must be followed by an appropriate baking treatment, or a non-electroplated finish (mechanical zinc, zinc flake) should be substituted.

Comparable Grades

For Deep Groove Ball Bearing — ISO / DIN (Series 132), class 8.8 is the comparable strength step. Move up when the joint preload approaches the proof load of the current class; move down when the joint is over-specified. For corrosion-critical service, switch to stainless A2 or A4.

Sizes of Deep Groove Ball Bearing — ISO / DIN (Series 132) Available in Grade 12.9 Steel

Bore d (mm)Outer diameter D (mm)Width B (mm)Dynamic load C (kN)Limit speed (rpm)Reference standard
103095.132000ISO 15 / GB/T 276
1232106.9528000ISO 15 / GB/T 276
1535117.6524000ISO 15 / GB/T 276
1740129.5622000ISO 15 / GB/T 276
20471412.718000ISO 15 / GB/T 276
25521514.016000ISO 15 / GB/T 276
30621619.513000ISO 15 / GB/T 276
35721725.511000ISO 15 / GB/T 276
40801830.710000ISO 15 / GB/T 276
45851933.29500ISO 15 / GB/T 276
50902035.19000ISO 15 / GB/T 276
601102252.77500ISO 15 / GB/T 276

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (ISO / DIN)

Bore d (mm)Outer diameter D (mm)Width B (mm)Dynamic load C (kN)Limit speed (rpm)Reference standard
103095.132000ISO 15 / GB/T 276
1232106.9528000ISO 15 / GB/T 276
1535117.6524000ISO 15 / GB/T 276
1740129.5622000ISO 15 / GB/T 276
20471412.718000ISO 15 / GB/T 276
25521514.016000ISO 15 / GB/T 276
30621619.513000ISO 15 / GB/T 276
35721725.511000ISO 15 / GB/T 276
40801830.710000ISO 15 / GB/T 276
45851933.29500ISO 15 / GB/T 276
50902035.19000ISO 15 / GB/T 276
601102252.77500ISO 15 / GB/T 276

Frequently Asked Questions

Can Grade 12.9 Steel replace stainless steel structurally?

No — stainless A2/A4 cannot match class 10.9 / 12.9 strength. Stainless is selected for corrosion, not raw strength.

Are Grade 12.9 Steel Deep Groove Ball Bearing — ISO / DIN (Series 132) magnetic?

Grade 12.9 Steel Deep Groove Ball Bearing — ISO / DIN (Series 132) are magnetic.

What corrosion resistance do Grade 12.9 Steel Deep Groove Ball Bearing — ISO / DIN (Series 132) offer?

Grade 12.9 Steel Deep Groove Ball Bearing — ISO / DIN (Series 132) provide requires plating or black-oxide protection with a service range of up to approx. +300 °C.

When should I move from class 12.9 to class 8.8 for Deep Groove Ball Bearing — ISO / DIN (Series 132)?

Step up to class 8.8 when the joint preload approaches the proof load of the current class. The higher class adds preload at the same diameter, often saving size and weight.

How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.