Button Head Socket Screws manufactured in A4 Stainless Steel (A4-80 (316)) are dimensioned to ISO 7380. The sections below give the mechanical and physical properties of the grade, its behavior in corrosive and elevated-temperature service, and the full size table.
Why Choose A4 Stainless Steel for Button Head Socket Screws
Specified for marine, coastal and chemical applications. For button head socket screws, this matters when superior, including marine and chloride environments is the primary requirement.
Mechanical & Physical Properties
| Grade designation | A4-80 (316) |
|---|---|
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C |
| Corrosion characteristic | Superior, including marine and chloride environments |
Corrosion Behavior in Service
A4 (316) adds 2–3% molybdenum to the A2 (304) composition, which dramatically improves resistance to chloride-pitting corrosion. For Button Head Socket Screws in marine, coastal, swimming-pool or food-processing environments, A4 is the default selection.
Comparable Grades
For Button Head Socket Screws, the alternative stainless grade is A2 (304). A2 (304) suits general indoor and outdoor service; A4 (316) adds molybdenum for marine and chloride environments. Where higher strength matters more than corrosion, switch to plated alloy-steel class 8.8 or 10.9.
Sizes of Button Head Socket Screws Available in A4 Stainless Steel
| Size | Pitch (mm) | Head diameter dk (mm) | Head height k (mm) | Hex socket s (mm) | Reference standard |
|---|---|---|---|---|---|
| M3 | 0.5 | 5.7 | 1.65 | 2.0 | ISO 7380-1 / DIN 7380 |
| M4 | 0.7 | 7.6 | 2.2 | 2.5 | ISO 7380-1 / DIN 7380 |
| M5 | 0.8 | 9.5 | 2.75 | 3.0 | ISO 7380-1 / DIN 7380 |
| M6 | 1.0 | 10.5 | 3.3 | 4.0 | ISO 7380-1 / DIN 7380 |
| M8 | 1.25 | 14.0 | 4.4 | 5.0 | ISO 7380-1 / DIN 7380 |
| M10 | 1.5 | 17.5 | 5.5 | 6.0 | ISO 7380-1 / DIN 7380 |
| M12 | 1.75 | 21.0 | 6.6 | 8.0 | ISO 7380-1 / DIN 7380 |
| M14 | 2.0 | 24.5 | 7.7 | 10.0 | ISO 7380-1 / DIN 7380 |
| M16 | 2.0 | 28.0 | 8.8 | 10.0 | ISO 7380-1 / DIN 7380 |
| M20 | 2.5 | 35.0 | 11.0 | 12.0 | ISO 7380-1 / DIN 7380 |