For Wing Nuts in A4 Stainless Steel, the controlling decisions are corrosion, strength and service temperature. This guide summarizes those three for A4 Stainless Steel Wing Nuts and lists every size we supply.
Why Choose A4 Stainless Steel for Wing Nuts
Specified for marine, coastal and chemical applications. For wing nuts, this matters when superior, including marine and chloride environments is the primary requirement.
Mechanical & Physical Properties
| Grade designation | A4-80 (316) |
|---|---|
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C |
| Corrosion characteristic | Superior, including marine and chloride environments |
Corrosion Behavior in Service
A4 (316) adds 2–3% molybdenum to the A2 (304) composition, which dramatically improves resistance to chloride-pitting corrosion. For Wing Nuts in marine, coastal, swimming-pool or food-processing environments, A4 is the default selection.
Galvanic & Galling Considerations
Two important notes for stainless wing nuts: (1) stainless can gall on stainless threads under load — use a thread lubricant or anti-galling compound, especially for M6 and below; (2) when joined to aluminum or galvanized steel, stainless can drive galvanic corrosion of the less-noble metal in wet service — isolate with a coating or sleeve where appropriate.
Sizes of Wing Nuts Available in A4 Stainless Steel
| Size | Pitch (mm) | Wing span (mm) | Wing height (mm) | Body height (mm) | Reference standard | Notes |
|---|---|---|---|---|---|---|
| M4 | 0.7 | 28 | 17 | 9 | DIN 315 | Hand-tightened wing nut |
| M5 | 0.8 | 32 | 19 | 10 | DIN 315 | Hand-tightened wing nut |
| M6 | 1.0 | 37 | 22 | 12 | DIN 315 | Hand-tightened wing nut |
| M8 | 1.25 | 45 | 27 | 15 | DIN 315 | Hand-tightened wing nut |
| M10 | 1.5 | 55 | 33 | 18 | DIN 315 | Hand-tightened wing nut |
| M12 | 1.75 | 64 | 38 | 22 | DIN 315 | Hand-tightened wing nut |