Material page for closed-end round-body blind rivet nuts in Property Class 12.9 Steel (ISO 898-1 property class 12.9). The sizes below are the ones we supply; there is no published dimensional standard for this article, so the table rather than a standard number is what to quote. Corrosion behaviour is requires plating or black-oxide protection and the service range is commonly limited to approx. +300 °C; confirm against the coating and the load.
Why Choose Property Class 12.9 Steel for Closed-End Round-Body Blind Rivet Nuts
The highest common strength class, for high-load machine assembly. For closed-end round-body blind rivet nuts, this matters when requires plating or black-oxide protection is the primary requirement.
Mechanical & Physical Properties
| Grade designation | ISO 898-1 property class 12.9 |
|---|---|
| Magnetic response | Magnetic |
| Service temperature | commonly limited to approx. +300 °C; confirm against the coating and the load |
| Corrosion characteristic | Requires plating or black-oxide protection |
Corrosion Behavior in Service
Carbon and alloy steel closed-end round-body blind rivet nuts require a coating for corrosion protection. Zinc plating (with or without passivation) is the most common; hot-dip galvanizing is used for outdoor structural service; black-oxide is mainly a tarnish-prevention finish for tool-room use.
Comparable Grades
For Closed-End Round-Body Blind Rivet Nuts, class 8.8 is the comparable strength step. Move up when the joint preload approaches the proof load of the current class; move down when the joint is over-specified. For corrosion-critical service, switch to stainless A2 or A4.
Sizes of Closed-End Round-Body Blind Rivet Nuts Available in Property Class 12.9 Steel
| Thread size | Pitch (mm) | Grip range (mm) | Installation hole (mm) | Head diameter (mm) | End | Material options |
|---|---|---|---|---|---|---|
| M4 | 0.7 | 0.5~2.5 | 6.1 | 9.0 | closed | zinc-plated steel / stainless steel / aluminum alloy |
| M5 | 0.8 | 0.5~3.0 | 7.1 | 10.0 | closed | zinc-plated steel / stainless steel / aluminum alloy |
| M6 | 1.0 | 0.5~3.0 / 3.0~5.0 | 9.1 | 12.0 | closed | zinc-plated steel / stainless steel / aluminum alloy |
| M8 | 1.25 | 0.5~3.0 / 3.0~5.5 | 11.1 | 15.0 | closed | zinc-plated steel / stainless steel / aluminum alloy |
| M10 | 1.5 | 1.0~3.5 | 13.1 | 17.0 | closed | zinc-plated steel / stainless steel / aluminum alloy |
Dimensions are independent of the material: every size above is available in Property Class 12.9 Steel.
Custom manufacturing · Made to drawing
Need this nut in a grade that is not listed?
Grade 12 9 Steel is one of the grades the catalog describes. Locking method is specifiable independently of the rest: nylon insert, all-metal deformed thread, serrated flange, or none. Made by cold heading or tapping.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.







