Grade 12.9 Steel Helical Thread Inserts pairs the standard DIN 8140 with a Grade 12.9 Steel base material. The sections below cover why engineers select this grade for helical thread inserts, its corrosion and temperature behavior, and the sizes available.
Why Choose Grade 12.9 Steel for Helical Thread Inserts
The highest common strength class, for high-load machine assembly. For helical thread inserts, this matters when requires plating or black-oxide protection is the primary requirement.
Mechanical & Physical Properties
| Grade designation | class 12.9 |
|---|---|
| Magnetic response | Magnetic |
| Service temperature | up to approx. +300 °C |
| Corrosion characteristic | Requires plating or black-oxide protection |
Galvanic & Galling Considerations
For helical thread inserts in steel, the dominant compatibility issue is hydrogen embrittlement at high property classes (10.9 and above) when electroplated. Plating must be followed by an appropriate baking treatment, or a non-electroplated finish (mechanical zinc, zinc flake) should be substituted.
Comparable Grades
For Helical Thread Inserts, class 8.8 is the comparable strength step. Move up when the joint preload approaches the proof load of the current class; move down when the joint is over-specified. For corrosion-critical service, switch to stainless A2 or A4.
Sizes of Helical Thread Inserts Available in Grade 12.9 Steel
| Thread size | Pitch (mm) | Length (mm) | Drill / tap size (mm) | Free coil diameter (mm) | Reference standard | Notes |
|---|---|---|---|---|---|---|
| M3 | 0.5 | 4.5 | 3.1 (STI tap) | 3.45 | DIN 8140 / ISO 10130 | Wire thread insert, 1.5xD length; tang break-off |
| M3 | 0.5 | 6.0 | 3.1 (STI tap) | 3.45 | DIN 8140 / ISO 10130 | Wire thread insert, 2xD length; tang break-off |
| M4 | 0.7 | 6.0 | 4.2 (STI tap) | 4.57 | DIN 8140 / ISO 10130 | Wire thread insert, 1.5xD length; tang break-off |
| M4 | 0.7 | 8.0 | 4.2 (STI tap) | 4.57 | DIN 8140 / ISO 10130 | Wire thread insert, 2xD length; tang break-off |
| M5 | 0.8 | 7.5 | 5.3 (STI tap) | 5.67 | DIN 8140 / ISO 10130 | Wire thread insert, 1.5xD length; tang break-off |
| M5 | 0.8 | 10.0 | 5.3 (STI tap) | 5.67 | DIN 8140 / ISO 10130 | Wire thread insert, 2xD length; tang break-off |
| M6 | 1.0 | 9.0 | 6.3 (STI tap) | 6.80 | DIN 8140 / ISO 10130 | Wire thread insert, 1.5xD length; tang break-off |
| M6 | 1.0 | 12.0 | 6.3 (STI tap) | 6.80 | DIN 8140 / ISO 10130 | Wire thread insert, 2xD length; tang break-off |
| M8 | 1.25 | 12.0 | 8.4 (STI tap) | 9.01 | DIN 8140 / ISO 10130 | Wire thread insert, 1.5xD length; tang break-off |
| M8 | 1.25 | 16.0 | 8.4 (STI tap) | 9.01 | DIN 8140 / ISO 10130 | Wire thread insert, 2xD length; tang break-off |
| M10 | 1.5 | 15.0 | 10.5 (STI tap) | 11.26 | DIN 8140 / ISO 10130 | Wire thread insert, 1.5xD length; tang break-off |
| M10 | 1.5 | 20.0 | 10.5 (STI tap) | 11.26 | DIN 8140 / ISO 10130 | Wire thread insert, 2xD length; tang break-off |
| M12 | 1.75 | 18.0 | 12.6 (STI tap) | 13.51 | DIN 8140 / ISO 10130 | Wire thread insert, 1.5xD length; tang break-off |
| M12 | 1.75 | 24.0 | 12.6 (STI tap) | 13.51 | DIN 8140 / ISO 10130 | Wire thread insert, 2xD length; tang break-off |
| M16 | 2.0 | 24.0 | 16.5 (STI tap) | 17.71 | DIN 8140 / ISO 10130 | Wire thread insert, 1.5xD length; tang break-off |
| M20 | 2.5 | 30.0 | 20.5 (STI tap) | 22.07 | DIN 8140 / ISO 10130 | Wire thread insert, 1.5xD length; tang break-off |