Grade 8.8 Steel Wing Nut combine the dimensional form of GB/T 62 / DIN 315 with the material properties of grade class 8.8: requires plating (zinc) for corrosion protection, magnetic, service range up to approx. +300 °C. This page summarizes the grade data, its corrosion behavior in service, the comparable grades, and the sizes supplied.
Why Choose Grade 8.8 Steel for Wing Nut — GB/T 62 / DIN 315 (Series 077)
The workhorse medium-carbon alloy grade for structural joints. For wing nut — gb/t 62 / din 315 (series 077), this matters when requires plating (zinc) for corrosion protection is the primary requirement.
Mechanical & Physical Properties
| Grade designation | class 8.8 |
|---|---|
| Magnetic response | Magnetic |
| Service temperature | up to approx. +300 °C |
| Corrosion characteristic | Requires plating (zinc) for corrosion protection |
Galvanic & Galling Considerations
For wing nut — gb/t 62 / din 315 (series 077) in steel, the dominant compatibility issue is hydrogen embrittlement at high property classes (10.9 and above) when electroplated. Plating must be followed by an appropriate baking treatment, or a non-electroplated finish (mechanical zinc, zinc flake) should be substituted.
Comparable Grades
For Wing Nut — GB/T 62 / DIN 315 (Series 077), class 10.9 or 12.9 is the comparable strength step. Move up when the joint preload approaches the proof load of the current class; move down when the joint is over-specified. For corrosion-critical service, switch to stainless A2 or A4.
Sizes of Wing Nut — GB/T 62 / DIN 315 (Series 077) Available in Grade 8.8 Steel
| Size | Pitch (mm) | Wing width A (mm) | Wing height h (mm) | Nut height m (mm) | Reference standard |
|---|---|---|---|---|---|
| M3 | 0.5 | 12 | 8 | 5 | GB/T 62 / DIN 315 |
| M4 | 0.7 | 16 | 10 | 7 | GB/T 62 / DIN 315 |
| M5 | 0.8 | 20 | 12 | 8 | GB/T 62 / DIN 315 |
| M6 | 1.0 | 24 | 14 | 10 | GB/T 62 / DIN 315 |
| M8 | 1.25 | 32 | 18 | 13 | GB/T 62 / DIN 315 |
| M10 | 1.5 | 40 | 22 | 16 | GB/T 62 / DIN 315 |
| M12 | 1.75 | 48 | 26 | 19 | GB/T 62 / DIN 315 |
| M16 | 2.0 | 60 | 32 | 24 | GB/T 62 / DIN 315 |