Grade 8.8 Steel Compression Springs are stocked to DIN 2098. The grade provides requires plating (zinc) for corrosion protection and is magnetic; the practical service range is up to approx. +300 °C. Property data, grade comparison and the full size table follow.
Why Choose Grade 8.8 Steel for Compression Springs
The workhorse medium-carbon alloy grade for structural joints. For compression springs, this matters when requires plating (zinc) for corrosion protection is the primary requirement.
Mechanical & Physical Properties
| Grade designation | class 8.8 |
|---|---|
| Magnetic response | Magnetic |
| Service temperature | up to approx. +300 °C |
| Corrosion characteristic | Requires plating (zinc) for corrosion protection |
Corrosion Behavior in Service
Carbon and alloy steel compression springs require a coating for corrosion protection. Zinc plating (with or without passivation) is the most common; hot-dip galvanizing is used for outdoor structural service; black-oxide is mainly a tarnish-prevention finish for tool-room use.
Galvanic & Galling Considerations
For compression springs in steel, the dominant compatibility issue is hydrogen embrittlement at high property classes (10.9 and above) when electroplated. Plating must be followed by an appropriate baking treatment, or a non-electroplated finish (mechanical zinc, zinc flake) should be substituted.
Sizes of Compression Springs Available in Grade 8.8 Steel
| Wire dia d (mm) | Inner diameter Di (mm) | Outer diameter De (mm) | Free length Lo (mm) | Active coils n | Rated force Fn (N) | Rate k (N/mm) | Material | Reference standard | Notes |
|---|---|---|---|---|---|---|---|---|---|
| 0.5 | 3.0 | 4.0 | 15 | 8 | 8 | 1.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 0.5 | 4.0 | 5.0 | 20 | 10 | 6 | 0.7 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 0.6 | 4.0 | 5.2 | 20 | 9 | 12 | 1.5 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 0.7 | 5.0 | 6.4 | 25 | 10 | 15 | 1.5 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 0.8 | 5.0 | 6.6 | 25 | 10 | 22 | 2.5 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 1.0 | 6.0 | 8.0 | 30 | 10 | 35 | 3.5 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 1.0 | 8.0 | 10.0 | 40 | 12 | 25 | 2.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 1.2 | 8.0 | 10.4 | 40 | 10 | 55 | 6.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 1.5 | 10.0 | 13.0 | 50 | 10 | 80 | 8.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 1.6 | 12.0 | 15.2 | 60 | 10 | 90 | 8.5 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 2.0 | 12.0 | 16.0 | 60 | 10 | 165 | 18.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 2.0 | 16.0 | 20.0 | 80 | 12 | 110 | 10.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 2.5 | 16.0 | 21.0 | 80 | 10 | 260 | 28.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 2.5 | 20.0 | 25.0 | 100 | 12 | 200 | 18.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 3.0 | 20.0 | 26.0 | 100 | 10 | 450 | 45.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 3.0 | 25.0 | 31.0 | 120 | 12 | 320 | 28.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 4.0 | 25.0 | 33.0 | 120 | 10 | 1000 | 90.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 4.0 | 30.0 | 38.0 | 150 | 12 | 750 | 65.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 5.0 | 30.0 | 40.0 | 150 | 10 | 1900 | 170.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 5.0 | 40.0 | 50.0 | 200 | 12 | 1200 | 100.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 6.0 | 40.0 | 52.0 | 200 | 10 | 3300 | 280.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 6.0 | 50.0 | 62.0 | 250 | 12 | 2100 | 185.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 8.0 | 50.0 | 66.0 | 250 | 10 | 7500 | 650.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 8.0 | 65.0 | 81.0 | 300 | 12 | 4800 | 430.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 10.0 | 65.0 | 85.0 | 300 | 10 | 14500 | 1200.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |
| 10.0 | 80.0 | 100.0 | 350 | 12 | 9500 | 800.0 | Spring steel SH/DH | DIN 2098 / EN 15800 | Compression spring, ground ends |