A clamping handle screw (long) — din 6336 / gn 313 (series 044 in M10: this guide pulls the row from the standard, adds the assembly numbers an engineer actually uses, and links you straight to a quote.
M10 Dimensional Row (DIN 6336 / GN 313)
| Thread size | Pitch (mm) | Length L (mm) | Handle length (mm) | Knob diameter (mm) | Reference standard |
|---|---|---|---|---|---|
| M10 | 1.5 | 40 | 70 | 45 | DIN 6336 / GN 313 |
Spanner & Drive for M10 Clamping Handle Screw (Long) — DIN 6336 / GN 313 (Series 044)
Drive geometry for M10 Clamping Handle Screw (Long) — DIN 6336 / GN 313 (Series 044) is given by the row above; match the tool to the listed values.
Hole Sizes for M10
| Coarse-thread pitch (ISO 724) | 1.5 mm |
|---|---|
| Through-hole / clearance (ISO 273 medium) | 11 mm |
| Tapping drill, coarse thread | 8.5 mm |
Tightening Torque for M10
| Class 8.8 (dry, ~µ 0.125) | ≈ 49 Nm |
|---|---|
| Class 10.9 (dry, ~µ 0.125) | ≈ 69 Nm |
| Class 12.9 (dry, ~µ 0.125) | ≈ 83 Nm |
Indicative dry-joint values. Lubrication can lower the required torque by 15–25%. Always confirm against the joint design, especially when going up a strength class.
Common Applications for M10 Clamping Handle Screw (Long) — DIN 6336 / GN 313 (Series 044)
M10 Clamping Handle Screw (Long) — DIN 6336 / GN 313 (Series 044) are commonly specified for general-purpose machinery, jigs, fixturing and light structural connections.
Mating Parts for M10
For M10, pair with a M10 hex nut (ISO 4032 / DIN 934) and, where used, a M10 flat washer (ISO 7089 / DIN 125A) under the head and under the nut.
When to Step Up or Down from M10
When the joint preload approaches the proof load of M10 class 8.8, step up to M12 class 8.8 (or move to M10 class 10.9). When the joint is over-specified, M8 often saves weight and cost without losing the safety margin.