A nyloc lock nut in M10: this guide pulls the row from the standard, adds the assembly numbers an engineer actually uses, and links you straight to a quote.
M10 Dimensional Row (DIN 985 / ISO 7040)
| Size | Pitch (mm) | Width across flats s (mm) | Width across corners e min (mm) | Total height m (mm) | Metal height (mm) | Reference standard | Notes |
|---|---|---|---|---|---|---|---|
| M10 | 1.5 | 16.0 | 17.77 | 10.0 | 8.04 | DIN 985 / ISO 7040 | With nylon insert, single use |
Spanner & Drive for M10 Nyloc Lock Nuts
Drive geometry for M10 Nyloc Lock Nuts is given by the row above; match the tool to the listed values.
Common Applications for M10 Nyloc Lock Nuts
M10 Nyloc Lock Nuts are commonly specified for general-purpose joints in machinery, fixturing and equipment frames.
Mating Parts for M10
Pair M10 with the matching M10 bolt or screw, plus a M10 flat washer where required to distribute load on softer materials.
When to Step Up or Down from M10
When the joint preload approaches the proof load of M10 class 8.8, step up to M12 class 8.8 (or move to M10 class 10.9). When the joint is over-specified, M8 often saves weight and cost without losing the safety margin.