M14 Nyloc Lock Nuts are manufactured to DIN 985 / ISO 7040. This page lists the controlling dimensions for the M14 size together with the drive and the installation notes for this type.
Values are taken from the governing standard rather than from a general machine-thread table, because this type is not selected on one.
M14 Dimensional Row (DIN 985 / ISO 7040)
| Size | Pitch (mm) | Width across flats s (mm) | Width across corners e min (mm) | Total height m (mm) | Metal height (mm) | Reference standard | Notes |
|---|---|---|---|---|---|---|---|
| M14 | 2.0 | 21.0 | 23.36 | 14.0 | 11.0 | DIN 985 / ISO 7040 | With nylon insert, single use |
Spanner & Drive for M14 Nyloc Lock Nuts
Drive geometry for M14 Nyloc Lock Nuts is given by the row above; match the tool to the listed values.
Tightening Torque for M14
| Class 8.8 (dry, ~µ 0.125) | ≈ 134 Nm |
|---|---|
| Class 10.9 (dry, ~µ 0.125) | ≈ 197 Nm |
| Class 12.9 (dry, ~µ 0.125) | ≈ 231 Nm |
Indicative dry-joint values. Lubrication can lower the required torque by 15–25%. Always confirm against the joint design, especially when going up a strength class.
Proof Load & Strength for M14
Nuts are graded to ISO 898-2 by the proof load the nut itself will hold (classes 04, 05, 5, 6, 8, 10 and 12), not by the 8.8 / 10.9 / 12.9 scale used for bolts. A class-8 nut is the correct mate for a class-8.8 bolt, and the joint is designed on the bolt, so no bolt-tension figure is quoted here.
Mating Parts for M14
Pair M14 with the matching M14 bolt or screw, plus a M14 flat washer where required to distribute load on softer materials.
Custom manufacturing · Made to drawing
Need nyloc lock nuts in a size this table does not list?
This page covers M14 nyloc lock nuts. Thread size is the obvious variable and rarely the interesting one — height for clearance, across-flats for the tool already in the cell, and the locking feature for the vibration actually present. Made by cold heading or tapping.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.
