When you need T-Slot Nuts in the M10 size, the controlling values come from DIN 508. This page lists them in one place — pitch, head geometry, tool size and the matching hole.
M10 Dimensional Row (DIN 508)
| Thread size | T-slot width (mm) | Nut width b (mm) | Total height h (mm) | Key height h1 (mm) | Hook width e (mm) | Reference standard |
|---|---|---|---|---|---|---|
| M10 | 12 | 14.0 | 14.0 | 8.0 | 12.4 | DIN 508 / GN505 |
Spanner & Drive for M10 T-Slot Nuts
Drive geometry for M10 T-Slot Nuts is given by the row above; match the tool to the listed values.
Common Applications for M10 T-Slot Nuts
M10 T-Slot Nuts are commonly specified for general-purpose joints in machinery, fixturing and equipment frames.
Mating Parts for M10
Pair M10 with the matching M10 bolt or screw, plus a M10 flat washer where required to distribute load on softer materials.
When to Step Up or Down from M10
When the joint preload approaches the proof load of M10 class 8.8, step up to M12 class 8.8 (or move to M10 class 10.9). When the joint is over-specified, M8 often saves weight and cost without losing the safety margin.