M12-1.50 Wheel Lug Nuts are manufactured to Trade series (acorn wheel lug nuts). This page lists the controlling dimensions for the M12-1.50 size together with the drive and the installation notes for this type.
Values are taken from the governing standard rather than from a general machine-thread table, because this type is not selected on one.
M12-1.50 Dimensional Row (Trade series (acorn wheel lug nuts))
| Thread size | Hex size (mm) | Overall length (mm) | Seat | End form | Thread hand | Material |
|---|---|---|---|---|---|---|
| M12-1.50 | 21 | 33.5 | 60-degree conical | closed-end acorn | right-hand | steel |
Spanner & Drive for M12-1.50 Wheel Lug Nuts
Drive geometry for M12-1.50 Wheel Lug Nuts is given by the row above; match the tool to the listed values.
Installation Tips for M12-1.50 Wheel Lug Nuts
- At M12-1.50 the stretch in the bolt becomes the controlling factor — for critical joints, use angle-controlled or stretch-controlled tightening instead of pure torque.
Mating Parts for M12-1.50
Pair M12-1.50 with the matching M12-1.50 bolt or screw, plus a M12-1.50 flat washer where required to distribute load on softer materials.
Custom manufacturing · Made to drawing
Need wheel lug nuts in a size this table does not list?
This page covers M12-1.50 wheel lug nuts. Height and across-flats are the two most often changed — a thinner nut for clearance, a larger hex for a tool that is already on the line. Made by cold heading or tapping.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.
